TYPE ST- 1100- 900 (CORRUGATED DOWEL)

Corrugated Dowel | ST- 1100 900

The mortar anchor is a restraint anchor and is used to install the last row of slabs on to concrete and masonry walls at horizontal installation. This anchor can be used for wind loads of up to 1000 N and can be used on projection, in addition it can be used both in horizontal and vertical joints. Load bearing and restraining corrugated stud. Material: SS304, SS316, SS316L, SS316TI, S235JR-MG, S235JR-HDG

Corrugated Dowel | ST- 1100 900

Load-bearing and retaining angles. Material: SS304, SS316, SS316L, SS316TI, S235JR-MG, S235JR-HDG ≤ 50oc 24h average temperature

Standard items:

Get a quote
Net anchor Code Ø Stud Stud length /EHD Ø Hole Ø Inside Hole depth Fixable thickness /EHD Hole volume Resin volume to inject
Type Code dv/mm l/mm do/mm dv/mm ho/mm tflx/mm cm3 cm3
BE 12×45 8708955 M-6M8 65 12 10 45 – 5.1 5.1
BE 12×60 8708956 M-6M8 80 12 10 60 – 6.8 6.8
BE 12×80 8708957 M-6M8 110 12 10 70 10 9.1 9.1
BE 15×85 8708952 M-8M10 160-110 15 13 85 55-30 15.0 15.0
BE 15×130 8708953 M-8M10 160 15 13 130 10 23.0 23.0
BE 20×85 8708954 M12 115 20 18 85 10 26.7 26.7
BM 11×1000 8708961 M8 var. 12 9.5 var. – – –
BM 15×1000 8708962 M10 var. 16 13.5 var. – – –
BM 20×1000 8708963 M12 var. 22 19.0 var. – – –

Angles of different dimensions can be manufactured upon specific demand.

Net anchor Code Ø Stud Stud length /EHD Ø Hole Ø Inside Hole depth Fixable thickness /EHD Hole volume Resin volume to inject
Type Code dv/mm l/mm do/mm dv/mm ho/mm tflx/mm cm3 cm3
BE 12×45 8708955 M-6M8 65 12 10 45 – 5.1 5.1
BE 12×60 8708956 M-6M8 80 12 10 60 – 6.8 6.8
BE 12×80 8708957 M-6M8 110 12 10 70 10 9.1 9.1
BE 15×85 8708952 M-8M10 160-110 15 13 85 55-30 15.0 15.0
BE 15×130 8708953 M-8M10 160 15 13 130 10 23.0 23.0
BE 20×85 8708954 M12 115 20 18 85 10 26.7 26.7
BM 11×1000 8708961 M8 var. 12 9.5 var. – – –
BM 15×1000 8708962 M10 var. 16 13.5 var. – – –
BM 20×1000 8708963 M12 var. 22 19.0 var. – – –