Stainless steel stonework support brackets.Natural Stone Cladding are used as the basis for our stainless steel brackets-body bracket.

Materials: SS304, SS316, SS316L, SS316TI.

Body anchors

Body anchors (structural anchors) are suitable for largestand-off distances of 140 to 300mm and loads of up to 1300N. The pre-assembled anchors consist of the main bracket, the adjustable wedge plate and a spade bolt. Vertical bracket adjustment is made using the sliding wedge plate. The stand-off distance to the supporting substrate can be adjusted using the spade bolt. The Body anchor can also be pivoted around the fixing bolt for lateral adjustment. The spade bolt is pre-assembled to use in the horizon panel, but is easily adjusted for use in the vertical joints by

rotating the spade bolt. The clamping bolt must be tightened with a spanner following the installation of the natural stone panel to a torque of 5 Nm.

Quality features:

.stand-off distance of 30-370 mm, maximum load 1300 N as standard version

.adjustable in three directions

.anchor can swivel 15° left and right

.immediate load-bearing capacities

.can be used in horizontal and vertical joints

Stone cladding fixing systems, mechanical fixing stone cladding, stone cladding fixing detail, stone cladding mechanical fixing details dwg, marble cladding fixing details dwg, cladding fixing methods, stone clips for granite, stone cladding brackets ,