General Information
Chemical Composition
Physical Properties
Mechanical Properties
General Information
Titanium Grade 2 is slightly stronger than Grade 1, but otherwise shares a lot of the same qualities. It is also corrosion resistant. Grade 2 is known for its weldability. Like all other titanium grades, it is also strong. It does not lose its strength when it is deformed, making it very ductile and formable. Grade 2 Ti is usually purchased in bars, tubing, pipes, sheets and plates. The types of applications Grade 2 is used for include: architecture, power generation, medical industry, airframe skin, chemical processing, marine industry and hydro-carbon processing.
Available in four distinct grades (1, 2, 3, and 4), Titanium is classified by its corrosion resistance, ductility, and strength. CP Ti Gr. 1 has the highest corrosion resistance, formability, and lowest strength, whereas, CP Ti Gr. 4 offers the highest strength with moderate formability. The most desirable feature of CP Ti is its ability to osseointegrate within the human body. Titanium also offers a higher strength-to-weight ratio and increased corrosion resistance compared to the stainless steel alloys, thus making it an attractive choice for medical applications
Grade 2 has higher levels of iron and oxygen than other CP grades, which offers excellent formability and moderate strength with superior corrosion resistance. CP Grade 2 titanium is widely used in heat exchangers. CP2 is one of the most common titanium grades, with properties that make it a good candidate for chemical and marine, aerospace and medical applications
Standard Inventory Specifications
- UNS R50400
- AMS 4902
- ASTM B 265
- ASTM B 348
- ASTM F 67
- MIL-T-9046 CP-3
- MIL-T-9047 CP-3
- DFARS Compliant
Common Applications of CP Grade 2
- Airframe skins, ductwork, brackets, galley equipment
- Chemical processing condensers, evaporators, reaction vessels
- Desalinization plant tubing and tube heaters
- Cryogenic vessels
- Heat exchangers
- Electroplating
- Gaskets
- Medical devices
Chemical Composition
Chemical Composition of CP Grade 2 Titanium
Element
Percent by Weight
N
Nitrogen
0.03% max
C
Carbon
0.10% max
O
Oxygen
0.25% max
Fe
Iron
0.30% max
H
Hydrogen
0.0155% max
Ti
Titanium
Balance
–
Other
0.4% max
Physical Properties
Physical Properties of CP Grade 2 Titanium
| Physical property | T (°F) | T (°C) | Value | Value (SI) |
| Density | 0.1630 lb/in³ | 4.512 g/cm3 | ||
| Beta Transus | 1650- 1700 | 899- 927 | ||
| Melting (liquidus) Point | 3020- 3040 | 1660- 1671 | ||
| Specific Heat | 73 | 23 | 0.1250 Btu/°F | |
| Electrical Resistivity | 104 210 606 | 40 99 319 | 294.8 ???in 24.0 ???in 39.4 ???in | 7.5 μΩ∙m .61 μΩ∙m 1.0 μΩ∙m |
| Modules of Elasticity | 15.0 x 10³ ksi | 10.3 x 104 MPa | ||
| Magnetic Attraction | non | e |
Mechanical Properties
Mechanical Properties of CP Grade 2 Titanium
- Typical mechanical properties for CP Grade 2 titanium have an approximate Fatigue Limit Range for Smooth Axial Fatigue of R=0.1 – 275-345Mpa (40-50 ksi)
| Room Temperature Mechanical Properties | UTS Ksi (MPa) | YS Ksi (MPa) | %EI | %RA | |||
| Specified Minimum Properties | 50 (345) | 40 (275) | 20 | 30 | |||
| Typical Properties | 74-88 (510-605) | 49-79 (335-545) | 21-29 | 47-54 | |||
CP Grade 2 Seamless Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: OD: Φ4-Φ1219mm; WT:…
Introduction: Wisine its production capacity of stainless steel seamless pipe, roughly 2100 tons per month. As per your requirement…
Get a quote Learn More
CP Grade 2 Sanitary Tube
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: OD: Φ8-Φ850mm; WT:…
Introduction: Wisine produces sanitary tubes that are widely applicable to food & beverage industry, pharmaceutical industry…
Get a quote Learn More
CP Grade 2 Thick-walled Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: OD: Φ10-Φ1219mm; WT:…
Introduction: Thick-walled stainless steel pipe, also named stainless steel hollow bar, are usually used for mechanical applications or…
Get a quote Learn More
CP Grade 2 Welded Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: OD: Φ6-Φ2800mm; WT:…
Introduction: Wisine produces welded stainless steel pipe in different shapes: round, square and rectangle. In comparison with seamless pipe…
Get a quote Learn More
CP Grade 2 Square Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: Side Length: 4×4-300×300mm…
Introduction: As per your requirement, stainless steel square pipe can be made into welded stainless steel square pipe or…
Get a quote Learn More
CP Grade 2 Rectangle Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: Side Length: 4×6-200×400…
Introduction: Stainless steel rectangle pipe is hollow stainless steel long product and can be classified into seamless and welded…
Get a quote Learn More
CP Grade 2 Capillary Tube
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: OD: Φ0.4-Φ16.0mm; WT:…
Introduction: Wisine produces stainless steel capillary with different finishes for your option. Quite common in our international markets…
Get a quote Learn More
CP Grade 2 Coil Tube
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: OD: Φ0.4-Φ16mm; WT:…
Introduction: Stainless steel coil tubes refer to those tubes with diameter ranging from 0.5mm to 20mm and wall thickness from…
Get a quote Learn More
CP Grade 2 Elbow
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Outer Diameter: DN15 – DN600…
Wall Thickness: Sch5S- Sch160…
Classification: 45° elbow, 90° elbow, 180° elbow, long radius elbow, short radius elbow…
Get a quote Learn More
CP Grade 2 Flange
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Outer Diameter: DN6 – DN750…
Wall Thickness: Sch5S-Sch160S…
Classification: SW (Socket Welding) flange, WN (Welding Neck) flange, SO (Slip-On) flange…
Get a quote Learn More
CP Grade 2 Tee
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Outer Diameter: DN15 – DN750…
Wall Thickness: Sch5S-Sch160…
Classification: Straight tee, reducing tee…
Get a quote Learn More
CP Grade 2 Cross
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Outer Diameter: DN15 – DN1200…
Wall Thickness: Sch5S-Sch160…
Classification: Straight cross, reducing cross…
Get a quote Learn More
CP Grade 2 Reducer
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Outer Diameter: DN15 – DN500…
Wall Thickness: Sch5S-Sch160…
Classification: Concentric reducer, eccentric reducer…
Get a quote Learn More
CP Grade 2 Pipe Cap
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Outer Diameter: DN15 – DN1200…
Wall Thickness: Sch5S- Sch160…
Classification: Hemispherical cap, elliptical/oval cap, dish cap, spherical cap…
Get a quote Learn More
CP Grade 2 Round Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: Diameter: 2mm – 600mm…
Introduction: Stainless steel round bars are categorized as both long products and bar materials. SS round bar is long stainless steel product…
Get a quote Learn More
CP Grade 2 Flat Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: Thickness: 0.5mm – 200mm…
Introduction: Stainless steel flat bars are of rectangle shape with root face (or round edges) and they can be semi-finished or finished…
Get a quote Learn More
CP Grade 2 Angle Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: Equal Angle Bar Dimensions…
Introduction: Stainless steel angle bars are L-shape bars with two side widths perpendicular to each other. The two widths can be equal…
Get a quote Learn More
CP Grade 2 Square Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: Dimensions: 2mmx2mm – …
Introduction: Stainless steel square bars are long stainless steel products with its cross section as square. At Wisine, we produce SS square…
Get a quote Learn More
CP Grade 2 Hexagon Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: Dimension: 3mm – 180mm…
Introduction: Stainless steel hex bar is solid stainless steel long product with its cross section as hexagonal. Wisine produce stainless…
Get a quote Learn More
CP Grade 2 Channel Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: Hot Rolled: 40mmx80mmx…
Introduction: Stainless steel channel bar is stainless steel long product with its section as U shape. At Wisine, apart from stainless steel…
Get a quote Learn More
CP Grade 2 Sheet
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: Thickness: ≤ 5mm…
Introduction: In Wisine, we refer to thickness below 5mm as stainless steel sheets and thickness above 5mm as SS plates…
Get a quote Learn More
CP Grade 2 Plate
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: Thickness: ≥ 5mm…
Introduction: In Wisine, we regard thickness above (includes) 5mm as stainless steel plates. Our stainless steel plates are hot rolled…
Get a quote Learn More
CP Grade 2 Coil
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: Width: ≥ 610mm…
Introduction: Our stainless steel coils are primary quality coils from the origin of Baosteel, ZPSS, TISCO, JISCO, ATI, SMC, HAYNES…
Get a quote Learn More
CP Grade 2 Strip
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: Width: ≤ 610mm…
Introduction: Stainless steel strip has its width less than 610mm, with its thickness ranging from 0.02mm to 6mm. For width over 610mm…
Get a quote Learn More
CP Grade 2 Wire
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: Diameter: 0.02mm-25mm…
Introduction: Wisine produces high quality wire and stainless steel wire rope. Our annual production capacity is roughly 8000 tons…
Get a quote Learn More
CP Grade 2 Wire Rod
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Diameter: Hot rolled wire rod:…
Weight: ≤500Kg per roll
Tolerance: H9, H11
Get a quote Learn More
CP Grade 2 Wire Rope
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 2…
Size: Φ0.15mm-Φ50mm…
Introduction: Wisine produces high quality wire and stainless steel wire rope. Our annual production capacity is roughly 8000 tons…