General Information
Chemical Composition
Physical Properties
Mechanical Properties
General Information
Titanium Grade 3 is the least used of the grades. It is stronger than Grades 1 and 2, similar in ductility, a little less formable, but it has higher mechanicals than Grades 1 and 2. If your application requires mid-range strength but massive corrosion resistance, Grade 3 is what you will want to use. Grade 3 applications include: chemical processing, medical and marine industries, and aerospace structures.
Standard Inventory Specifications
- UNS R50550
- AMS 4900
- ASTM F 67
- ASTM B265
- DFARS Compliant
- MIL-T 9046
Common Applications of CP Grade 3
- Aerospace structures
- Chemical processing
- Medical industry
- Marine industry
Chemical Composition
Chemical Composition of CP Grade 3 Titanium
Element
Percent by Weight
N
Nitrogen
0.05% max
C
Carbon
0.08% max
O
Oxygen
0.35% max
Fe
Iron
0.30% max
H
Hydrogen
0.015% max
Ti
Titanium
Remainder
–
Res. Each
0.1% max
–
Res. Total
0.4% max
Physical Properties
Physical Properties of CP Grade 3 Titanium
| Physical property | T (°F) | T (°C) | Value | Value (SI) | |
| Density | 0.163 lb/in3 | 4.512 g/cm3 | |||
| Beta Transus | 1690 | ||||
| Thermal Conductivity | 151.2 Btu-in/hr-ft²- °F | ||||
| Electrical Resistivity | 21 in | .53 m | |||
| Magnetic Permeability | Nonmagnetic | ||||
| Mean Coefficient of | 68-212 | 20-100 | 4.8×10 ¯?in in¯¹°F¯¹ |
8.6x 10m m¯¹°C¯¹ |
|
| Thermal Expansion | 68-572 | 20-300 | 5.3×10 ¯?in in¯¹°F¯¹ |
9.5x 10m m¯¹°C¯¹ |
|
| 68-932 | 20-500 | 5.4×10¯?in in¯¹°F¯¹ | 9.7x 10m m¯¹°C¯¹ |
||
| Elastic Modulus | 15.2-17.4 Msi | ||||
Mechanical Properties
Mechanical Properties of CP Grade 3 Titanium
| UTS Ksi (MPa) |
02% YS Ksi (MPa) |
%El | %RA |
| 85 (595) | 65 (450) | 25 | 48 |
- CP Grade 3 Pipes
- CP Grade 3 Fittings
- CP Grade 3 Bars
- CP Grade 3 Sheets & Plates
- CP Grade 3 Coils & Strips
- CP Grade 3 Wires
CP Grade 3 Seamless Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: OD: Φ4-Φ1219mm; WT:…
Introduction: Wisine its production capacity of stainless steel seamless pipe, roughly 2100 tons per month. As per your requirement…
Get a quote
Learn More
CP Grade 3 Sanitary Tube
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: OD: Φ8-Φ850mm; WT:…
Introduction: Wisine produces sanitary tubes that are widely applicable to food & beverage industry, pharmaceutical industry…
Get a quote
Learn More
CP Grade 3 Thick-walled Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: OD: Φ10-Φ1219mm; WT:…
Introduction: Thick-walled stainless steel pipe, also named stainless steel hollow bar, are usually used for mechanical applications or…
Get a quote
Learn More
CP Grade 3 Welded Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: OD: Φ6-Φ2800mm; WT:…
Introduction: Wisine produces welded stainless steel pipe in different shapes: round, square and rectangle. In comparison with seamless pipe…
Get a quote
Learn More
CP Grade 3 Square Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: Side Length: 4×4-300×300mm…
Introduction: As per your requirement, stainless steel square pipe can be made into welded stainless steel square pipe or…
Get a quote
Learn More
CP Grade 3 Rectangle Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: Side Length: 4×6-200×400…
Introduction: Stainless steel rectangle pipe is hollow stainless steel long product and can be classified into seamless and welded…
Get a quote
Learn More
CP Grade 3 Capillary Tube
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: OD: Φ0.4-Φ16.0mm; WT:…
Introduction: Wisine produces stainless steel capillary with different finishes for your option. Quite common in our international markets…
Get a quote
Learn More
CP Grade 3 Coil Tube
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: OD: Φ0.4-Φ16mm; WT:…
Introduction: Stainless steel coil tubes refer to those tubes with diameter ranging from 0.5mm to 20mm and wall thickness from…
Get a quote
Learn More
CP Grade 3 Elbow
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Outer Diameter: DN15 – DN600…
Wall Thickness: Sch5S- Sch160…
Classification: 45° elbow, 90° elbow, 180° elbow, long radius elbow, short radius elbow…
Get a quote
Learn More
CP Grade 3 Flange
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Outer Diameter: DN6 – DN750…
Wall Thickness: Sch5S-Sch160S…
Classification: SW (Socket Welding) flange, WN (Welding Neck) flange, SO (Slip-On) flange…
Get a quote
Learn More
CP Grade 3 Tee
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Outer Diameter: DN15 – DN750…
Wall Thickness: Sch5S-Sch160…
Classification: Straight tee, reducing tee…
Get a quote
Learn More
CP Grade 3 Cross
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Outer Diameter: DN15 – DN1200…
Wall Thickness: Sch5S-Sch160…
Classification: Straight cross, reducing cross…
Get a quote
Learn More
CP Grade 3 Reducer
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Outer Diameter: DN15 – DN500…
Wall Thickness: Sch5S-Sch160…
Classification: Concentric reducer, eccentric reducer…
Get a quote
Learn More
CP Grade 3 Pipe Cap
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Outer Diameter: DN15 – DN1200…
Wall Thickness: Sch5S- Sch160…
Classification: Hemispherical cap, elliptical/oval cap, dish cap, spherical cap…
Get a quote
Learn More
CP Grade 3 Round Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: Diameter: 2mm – 600mm…
Introduction: Stainless steel round bars are categorized as both long products and bar materials. SS round bar is long stainless steel product…
Get a quote
Learn More
CP Grade 3 Flat Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: Thickness: 0.5mm – 200mm…
Introduction: Stainless steel flat bars are of rectangle shape with root face (or round edges) and they can be semi-finished or finished…
Get a quote
Learn More
CP Grade 3 Angle Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: Equal Angle Bar Dimensions…
Introduction: Stainless steel angle bars are L-shape bars with two side widths perpendicular to each other. The two widths can be equal…
Get a quote
Learn More
CP Grade 3 Square Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: Dimensions: 2mmx2mm – …
Introduction: Stainless steel square bars are long stainless steel products with its cross section as square. At Wisine, we produce SS square…
Get a quote
Learn More
CP Grade 3 Hexagon Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: Dimension: 3mm – 180mm…
Introduction: Stainless steel hex bar is solid stainless steel long product with its cross section as hexagonal. Wisine produce stainless…
Get a quote
Learn More
CP Grade 3 Channel Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: Hot Rolled: 40mmx80mmx…
Introduction: Stainless steel channel bar is stainless steel long product with its section as U shape. At Wisine, apart from stainless steel…
Get a quote
Learn More
CP Grade 3 Sheet
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: Thickness: ≤ 5mm…
Introduction: In Wisine, we refer to thickness below 5mm as stainless steel sheets and thickness above 5mm as SS plates…
Get a quote
Learn More
CP Grade 3 Plate
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: Thickness: ≥ 5mm…
Introduction: In Wisine, we regard thickness above (includes) 5mm as stainless steel plates. Our stainless steel plates are hot rolled…
Get a quote
Learn More
CP Grade 3 Coil
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: Width: ≥ 610mm…
Introduction: Our stainless steel coils are primary quality coils from the origin of Baosteel, ZPSS, TISCO, JISCO, ATI, SMC, HAYNES…
Get a quote
Learn More
CP Grade 3 Strip
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: Width: ≤ 610mm…
Introduction: Stainless steel strip has its width less than 610mm, with its thickness ranging from 0.02mm to 6mm. For width over 610mm…
Get a quote
Learn More
CP Grade 3 Wire
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: Diameter: 0.02mm-25mm…
Introduction: Wisine produces high quality wire and stainless steel wire rope. Our annual production capacity is roughly 8000 tons…
Get a quote
Learn More
CP Grade 3 Wire Rod
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Diameter: Hot rolled wire rod:…
Weight: ≤500Kg per roll
Tolerance: H9, H11
Get a quote
Learn More
CP Grade 3 Wire Rope
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 3…
Size: Φ0.15mm-Φ50mm…
Introduction: Wisine produces high quality wire and stainless steel wire rope. Our annual production capacity is roughly 8000 tons…
Get a quote
Learn More