General Information
Chemical Composition
Physical Properties
Mechanical Properties
General Information
Ti 6 AL-4V ELI is commonly referred to surgical titanium because of its use in surgery. It is a more pure version of Grade 5 (Ti 6AL-4V) titanium alloy. It can be easily molded, and cut into small strands, coils, and wires.
It has the same strength, and high corrosion resistance as Ti 6AL-4V. It is also light-weight and is highly tolerant to damage by other alloys. Its use is highly desirable in the medical and dental fields for uses in complex surgical procedures not only because of these properties but also because of the unique surgical properties Ti 6AL-4V ELI has. It has superior biocompatibility making it easy to graft in and attach to bone all the while being accepted by the human body.
Standard Inventory Specifications
- AMS 4930 – Bar, Wire, Billet, and Rings (annealed)
- AMS 4931 – Bar, Billet, and Rings
- AMS 4996 – Billet
- ASTM F 136 – Surgical Implants
Common Applications of Ti 6 AL-4V ELI
- Orthopedic pins and screws
- Orthopedic cables
- Ligature clips
- Surgical staples
- Springs
- Orthodontic appliances
- In joint replacements
- Cryogenic vessels
- Bone fixation devices
Chemical Composition
Chemical Composition of 6-4 ELI Titanium
Element
Percent by Weight
Ti
Titanium
88-91%
Al
Aluminum
5.5 – 6.5%
V
Vanadium
3.5 – 4.5%
N
Nitrogen
0.03% max
C
Carbon
0.08% max
O
Oxygen
0.013% max
Fe
Iron
0.25% max
H
Hydrogen
0.0125% max
–
Res. Each
0.1% max
–
Res. Total
0.4% max
Physical Properties
Physical Properties of 6-4 ELI Titanium
Physical Property | T (°F) | T (°C) | Value | Value (SI) | |
Density | 72 | 22 | 0.163 lb in¯³ | 4.42 g cm¯³ | |
Beta Transus | 1825± 25 | 966± 14 | |||
Melting (liquidus ) Point | 3000- 3020± 25 | 1650- 1660± 14 | |||
Thermal Conductivity Mil Annealed | 68 600 | 20 315 | 3.8 Btu hr¯¹°F¯¹ 6.1 Btu hr¯¹°F¯¹ | 6.6 W m¯¹ K¯¹ 10.6 W m¯¹ K¯¹ | |
Specific Heat | 68 800 1600 | 20 425 870 | 0.140 Btu lb¯¹°F¯¹ 0.160 Btu lb¯¹°F¯¹ 0.220 Btu lb¯¹°F¯¹ | 0.580 J g¯¹K¯¹ 0.670 J g¯¹K¯¹ 0.930 J g¯¹K¯¹ | |
Electrical Resistivity | 32 600 1200 | 0 315 650 | 66 μΩ∙in 73 μΩ∙in | 1.68 μΩ∙m 1.86 μΩ∙m 1.89 μΩ∙m | |
74μΩ ∙in | 1.89 μΩ∙m | ||||
Magnetic Permeability | 1.00005 at 20 oersteds | ||||
Mean Coefficient of Thermal Expansion | 32-212 70-800 70-1200 | 0-100 20-425 20-650 | 5.0 x 10¯⁶in in ¯¹°F¯¹ 5.2 x 10¯⁶in in ¯¹°F¯¹ 5.4 x 10¯⁶in in ¯¹°F¯¹ | 9.0x 10¯⁶⁶m m¯¹°C¯¹ 9.4x 10¯⁶m m¯¹°C¯¹ 9.7x 10¯⁶m m¯¹°C¯¹ | |
Young?s Modulus | 68 450 | 20 230 | 15.5-17.7 Msi 13.8-16.2 Msi | 107-122 GPa 95-111 GPa | |
Shear Modulus | 68 | 20 | 5.9-6.5 Msi | 41-45 GPa | |
Poisson?s Ratio | 68 | 20 | .31 | .31 |
Mechanical Properties
Mechanical Properties of 6-4 ELI Titanium
Product 0.025-1.000 Sheet & Plate | Condition | Specification | Dir. | Temp°F (°C) | UTS Ksi (MPa) | 0.2% YS Ksi (MPa) | %EI | %RA |
0.025-1.000 Sheet & Plate | St | ASTM B265 | L & LT | 68 (20) | 120 (828) | 110 (759) | 10 | – |
≤3.00 RD or Thk. | Annealed | ASTM B348 | L | 68 (20) | 120 (828) | 110 (759) | 10 | 25 |
≥1.75 RD or Thk. 1.75-2.50 2.50-4.00 | Annealed Annealed Annealed | ASTM F136 ASTM F136 ASTM F136 | L L & LT L, LT & ST | 68 (20) 68 (20) 68 (20) | 120 (828) 120 (860) 120 (825) | 115 (759) 110 (760) 115 (760) | 10 8 8 | 25 20 15 |
- Ti-6AL-4V ELI Pipes
- Ti-6AL-4V ELI Fittings
- Ti-6AL-4V ELI Bars
- Ti-6AL-4V ELI Sheets & Plates
- Ti-6AL-4V ELI Coils & Strips
- Ti-6AL-4V ELI Wires
Ti-6AL-4V ELI Seamless Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: OD: Φ4-Φ1219mm; WT:…
Introduction: Wisine its production capacity of stainless steel seamless pipe, roughly 2100 tons per month. As per your requirement…
Get a quote Learn More
Ti-6AL-4V ELI Sanitary Tube
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: OD: Φ8-Φ850mm; WT:…
Introduction: Wisine produces sanitary tubes that are widely applicable to food & beverage industry, pharmaceutical industry…
Get a quote Learn More
Ti-6AL-4V ELI Thick-walled Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: OD: Φ10-Φ1219mm; WT:…
Introduction: Thick-walled stainless steel pipe, also named stainless steel hollow bar, are usually used for mechanical applications or…
Get a quote Learn More
Ti-6AL-4V ELI Welded Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: OD: Φ6-Φ2800mm; WT:…
Introduction: Wisine produces welded stainless steel pipe in different shapes: round, square and rectangle. In comparison with seamless pipe…
Get a quote Learn More
Ti-6AL-4V ELI Square Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: Side Length: 4×4-300×300mm…
Introduction: As per your requirement, stainless steel square pipe can be made into welded stainless steel square pipe or…
Get a quote Learn More
Ti-6AL-4V ELI Rectangle Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: Side Length: 4×6-200×400…
Introduction: Stainless steel rectangle pipe is hollow stainless steel long product and can be classified into seamless and welded…
Get a quote Learn More
Ti-6AL-4V ELI Capillary Tube
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: OD: Φ0.4-Φ16.0mm; WT:…
Introduction: Wisine produces stainless steel capillary with different finishes for your option. Quite common in our international markets…
Get a quote Learn More
Ti-6AL-4V ELI Coil Tube
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: OD: Φ0.4-Φ16mm; WT:…
Introduction: Stainless steel coil tubes refer to those tubes with diameter ranging from 0.5mm to 20mm and wall thickness from…
Get a quote Learn More
Ti-6AL-4V ELI Elbow
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Outer Diameter: DN15 – DN600…
Wall Thickness: Sch5S- Sch160…
Classification: 45° elbow, 90° elbow, 180° elbow, long radius elbow, short radius elbow…
Get a quote Learn More
Ti-6AL-4V ELI Flange
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Outer Diameter: DN6 – DN750…
Wall Thickness: Sch5S-Sch160S…
Classification: SW (Socket Welding) flange, WN (Welding Neck) flange, SO (Slip-On) flange…
Get a quote Learn More
Ti-6AL-4V ELI Tee
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Outer Diameter: DN15 – DN750…
Wall Thickness: Sch5S-Sch160…
Classification: Straight tee, reducing tee…
Get a quote Learn More
Ti-6AL-4V ELI Cross
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Outer Diameter: DN15 – DN1200…
Wall Thickness: Sch5S-Sch160…
Classification: Straight cross, reducing cross…
Get a quote Learn More
Ti-6AL-4V ELI Reducer
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Outer Diameter: DN15 – DN500…
Wall Thickness: Sch5S-Sch160…
Classification: Concentric reducer, eccentric reducer…
Get a quote Learn More
Ti-6AL-4V ELI Pipe Cap
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Outer Diameter: DN15 – DN1200…
Wall Thickness: Sch5S- Sch160…
Classification: Hemispherical cap, elliptical/oval cap, dish cap, spherical cap…
Get a quote Learn More
Ti-6AL-4V ELI Round Bar
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: Diameter: 2mm – 600mm…
Introduction: Stainless steel round bars are categorized as both long products and bar materials. SS round bar is long stainless steel product…
Get a quote Learn More
Ti-6AL-4V ELI Flat Bar
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: Thickness: 0.5mm – 200mm…
Introduction: Stainless steel flat bars are of rectangle shape with root face (or round edges) and they can be semi-finished or finished…
Get a quote Learn More
Ti-6AL-4V ELI Angle Bar
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: Equal Angle Bar Dimensions…
Introduction: Stainless steel angle bars are L-shape bars with two side widths perpendicular to each other. The two widths can be equal…
Get a quote Learn More
Ti-6AL-4V ELI Square Bar
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: Dimensions: 2mmx2mm – …
Introduction: Stainless steel square bars are long stainless steel products with its cross section as square. At Wisine, we produce SS square…
Get a quote Learn More
Ti-6AL-4V ELI Hexagon Bar
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: Dimension: 3mm – 180mm…
Introduction: Stainless steel hex bar is solid stainless steel long product with its cross section as hexagonal. Wisine produce stainless…
Get a quote Learn More
Ti-6AL-4V ELI Channel Bar
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: Hot Rolled: 40mmx80mmx…
Introduction: Stainless steel channel bar is stainless steel long product with its section as U shape. At Wisine, apart from stainless steel…
Get a quote Learn More
Ti-6AL-4V ELI Sheet
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: Thickness: ≤ 5mm…
Introduction: In Wisine, we refer to thickness below 5mm as stainless steel sheets and thickness above 5mm as SS plates…
Get a quote Learn More
Ti-6AL-4V ELI Plate
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: Thickness: ≥ 5mm…
Introduction: In Wisine, we regard thickness above (includes) 5mm as stainless steel plates. Our stainless steel plates are hot rolled…
Get a quote Learn More
Ti-6AL-4V ELI Coil
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: Width: ≥ 610mm…
Introduction: Our stainless steel coils are primary quality coils from the origin of Baosteel, ZPSS, TISCO, JISCO, ATI, SMC, HAYNES…
Get a quote Learn More
Ti-6AL-4V ELI Strip
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: Width: ≤ 610mm…
Introduction: Stainless steel strip has its width less than 610mm, with its thickness ranging from 0.02mm to 6mm. For width over 610mm…
Get a quote Learn More
Ti-6AL-4V ELI Wire
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: Diameter: 0.02mm-25mm…
Introduction: Wisine produces high quality wire and stainless steel wire rope. Our annual production capacity is roughly 8000 tons…
Get a quote Learn More
Ti-6AL-4V ELI Wire Rod
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Diameter: Hot rolled wire rod:…
Weight: ≤500Kg per roll
Tolerance: H9, H11
Get a quote Learn More
Ti-6AL-4V ELI Wire Rope
Standard: ASTM, JIS, DIN, EU…
Grade: Ti-6AL-4V ELI…
Size: Φ0.15mm-Φ50mm…
Introduction: Wisine produces high quality wire and stainless steel wire rope. Our annual production capacity is roughly 8000 tons…