Copyright © Wisine Fasteners and Metals Co., Ltd. All Rights Reserved.
General Information
Chemical Composition
Physical Properties
Mechanical Properties
General Information
Titanium Grade 4 is the strongest of the pure Ti Grades. It is known for its corrosion resistance, and good formability and weldability. Grade 4 is used for applications where high strength is required. These applications include: heat exchangers, surgical hardware, cryogenic vessels, and airframe components.
Standard Inventory Specifications
- UNS R50700
- AMS 4901
- AMS 4921
- ASTM B 265
- ASTM B 348
- ASTM F 67
- ASM/MIL-81200
- MIL-T-9046
- MIL-T-9047
Common Applications of CP Grade 4
- Jet engine components
- Aerospace fasteners
- Marine and chemical processing and desalinization plants
- Corrosive waste disposal wells
- Pulp and paper production
Chemical Composition
Chemical Composition of CP Grade 4 Titanium
Element
Percent by Weight
N
Nitrogen
0.05% max
C
Carbon
0.08% max
O
Oxygen
0.4% max
Fe
Iron
0.5% max
H
Hydrogen
0.015% max
Ti
Titanium
Balance
–
Other
0.4% max
Physical Properties
Physical Properties of CP Grade 4 Titanium
| Physical Property | T (°F) | T (°C) | Value | Value (SI) | ||
| Density | 0.1630 lb/in³ | 4.512 g/cm3 | ||||
| Beta Transus | 1715-1765 | 935-963- | ||||
| Alpha Transus | 1635-1685 | 891-918 | ||||
| Melting (liquidus) Point | 3000-3040 | 1649-1671 | ||||
| Specific Heat | 73 | 73 23F) | 0.1250 Btu/°F | |||
| Modules of Elasticity | T (°F) | |||||
| Electrical Resistivity | 73 | 23F) | 3.93 ???in | .100 ???m | ||
| Modules of Elasticity | 15.0 x 10³ ksi | 10.3 x 104 MPa | ||||
Mechanical Properties
Mechanical Properties of CP Grade 4 Titanium
| Room Temperature Mechanical Properties | UTS Ksi (MPa) | YS Ksi (MPa) | %EI | %RA | |
| Specified Properties | 80 (550) | 70 (480) | 15 | 20 | |
| Typical Properties | 95-100 (655-690) | 70-92 (480-635) | 20-25 | 38-51 | |
CP Grade 4 Seamless Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: OD: Φ4-Φ1219mm; WT:…
Introduction: Wisine its production capacity of stainless steel seamless pipe, roughly 2100 tons per month. As per your requirement…
Get a quote Learn More
CP Grade 4 Sanitary Tube
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: OD: Φ8-Φ850mm; WT:…
Introduction: Wisine produces sanitary tubes that are widely applicable to food & beverage industry, pharmaceutical industry…
Get a quote Learn More
CP Grade 4 Thick-walled Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: OD: Φ10-Φ1219mm; WT:…
Introduction: Thick-walled stainless steel pipe, also named stainless steel hollow bar, are usually used for mechanical applications or…
Get a quote Learn More
CP Grade 4 Welded Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: OD: Φ6-Φ2800mm; WT:…
Introduction: Wisine produces welded stainless steel pipe in different shapes: round, square and rectangle. In comparison with seamless pipe…
Get a quote Learn More
CP Grade 4 Square Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: Side Length: 4×4-300×300mm…
Introduction: As per your requirement, stainless steel square pipe can be made into welded stainless steel square pipe or…
Get a quote Learn More
CP Grade 4 Rectangle Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: Side Length: 4×6-200×400…
Introduction: Stainless steel rectangle pipe is hollow stainless steel long product and can be classified into seamless and welded…
Get a quote Learn More
CP Grade 4 Capillary Tube
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: OD: Φ0.4-Φ16.0mm; WT:…
Introduction: Wisine produces stainless steel capillary with different finishes for your option. Quite common in our international markets…
Get a quote Learn More
CP Grade 4 Coil Tube
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: OD: Φ0.4-Φ16mm; WT:…
Introduction: Stainless steel coil tubes refer to those tubes with diameter ranging from 0.5mm to 20mm and wall thickness from…
Get a quote Learn More
CP Grade 4 Elbow
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Outer Diameter: DN15 – DN600…
Wall Thickness: Sch5S- Sch160…
Classification: 45° elbow, 90° elbow, 180° elbow, long radius elbow, short radius elbow…
Get a quote Learn More
CP Grade 4 Flange
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Outer Diameter: DN6 – DN750…
Wall Thickness: Sch5S-Sch160S…
Classification: SW (Socket Welding) flange, WN (Welding Neck) flange, SO (Slip-On) flange…
Get a quote Learn More
CP Grade 4 Tee
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Outer Diameter: DN15 – DN750…
Wall Thickness: Sch5S-Sch160…
Classification: Straight tee, reducing tee…
Get a quote Learn More
CP Grade 4 Cross
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Outer Diameter: DN15 – DN1200…
Wall Thickness: Sch5S-Sch160…
Classification: Straight cross, reducing cross…
Get a quote Learn More
CP Grade 4 Reducer
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Outer Diameter: DN15 – DN500…
Wall Thickness: Sch5S-Sch160…
Classification: Concentric reducer, eccentric reducer…
Get a quote Learn More
CP Grade 4 Pipe Cap
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Outer Diameter: DN15 – DN1200…
Wall Thickness: Sch5S- Sch160…
Classification: Hemispherical cap, elliptical/oval cap, dish cap, spherical cap…
Get a quote Learn More
CP Grade 4 Round Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: Diameter: 2mm – 600mm…
Introduction: Stainless steel round bars are categorized as both long products and bar materials. SS round bar is long stainless steel product…
Get a quote Learn More
CP Grade 4 Flat Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: Thickness: 0.5mm – 200mm…
Introduction: Stainless steel flat bars are of rectangle shape with root face (or round edges) and they can be semi-finished or finished…
Get a quote Learn More
CP Grade 4 Angle Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: Equal Angle Bar Dimensions…
Introduction: Stainless steel angle bars are L-shape bars with two side widths perpendicular to each other. The two widths can be equal…
Get a quote Learn More
CP Grade 4 Square Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: Dimensions: 2mmx2mm – …
Introduction: Stainless steel square bars are long stainless steel products with its cross section as square. At Wisine, we produce SS square…
Get a quote Learn More
CP Grade 4 Hexagon Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: Dimension: 3mm – 180mm…
Introduction: Stainless steel hex bar is solid stainless steel long product with its cross section as hexagonal. Wisine produce stainless…
Get a quote Learn More
CP Grade 4 Channel Bar
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: Hot Rolled: 40mmx80mmx…
Introduction: Stainless steel channel bar is stainless steel long product with its section as U shape. At Wisine, apart from stainless steel…
Get a quote Learn More
CP Grade 4 Sheet
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: Thickness: ≤ 5mm…
Introduction: In Wisine, we refer to thickness below 5mm as stainless steel sheets and thickness above 5mm as SS plates…
Get a quote Learn More
CP Grade 4 Plate
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: Thickness: ≥ 5mm…
Introduction: In Wisine, we regard thickness above (includes) 5mm as stainless steel plates. Our stainless steel plates are hot rolled…
Get a quote Learn More
CP Grade 4 Coil
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: Width: ≥ 610mm…
Introduction: Our stainless steel coils are primary quality coils from the origin of Baosteel, ZPSS, TISCO, JISCO, ATI, SMC, HAYNES…
Get a quote Learn More
CP Grade 4 Strip
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: Width: ≤ 610mm…
Introduction: Stainless steel strip has its width less than 610mm, with its thickness ranging from 0.02mm to 6mm. For width over 610mm…
Get a quote Learn More
CP Grade 4 Wire
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: Diameter: 0.02mm-25mm…
Introduction: Wisine produces high quality wire and stainless steel wire rope. Our annual production capacity is roughly 8000 tons…
Get a quote Learn More
CP Grade 4 Wire Rod
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Diameter: Hot rolled wire rod:…
Weight: ≤500Kg per roll
Tolerance: H9, H11
Get a quote Learn More
CP Grade 4 Wire Rope
Standard: ASTM, JIS, DIN, EU…
Grade: CP Grade 4…
Size: Φ0.15mm-Φ50mm…
Introduction: Wisine produces high quality wire and stainless steel wire rope. Our annual production capacity is roughly 8000 tons…