Fasteners>Anchors>Tie wire anchor

Through bolt anchor for heavy loads. Tie wire anchor.

Tie wire anchor

Tie wire anchor is a wedge style expansion anchor for use in normal weight concrete or in concrete over metal deck. With a tri-segmented, dual-embossed clip, the tie-wire anchor is ideal for the installation of acoustic ceiling grid and is easily set with the claw of a hammer.

Material:
  • 1/4″ eyelet for easy threading of wire
  • Sets with claw of hammer
  • Tri-segmented clip each segment adjusts independently to hole irregularities
  • Dual embossments on each clip segment enable the clip to undercut into the concrete, increasing follow-up expansion
  • Wedge-style expansion anchor for use in normal weight concrete or concrete over metal deck
Material: Carbon steel, Stainless steel
Installation: Drill a hole at least 1 1/2″ deep using a 1/4″-diameter carbide tipped bit. Drive the anchor into the hole until the bottom of the head is flush with the base material. Set the anchor by prying/pulling the head with the claw end of the hammer.
Get a quote
Professional box
Dimension
M6 x 45 Ø8 1200 pcs.
M6 x 60 Ø8 800 pcs.
M8 x 60 Ø10 600 pcs.
M8 x 80 Ø10 400 pcs.
M10 x 70 Ø12 200 pcs.
M10 x 100 Ø12 200 pcs.
M12 x 80 Ø16 200 pcs.
M12 x 110 Ø16 100 pcs.
M16 x 110 Ø20 50 pcs.
Concrete
Concrete
Reinforced concrete
Reinforced concrete
Stone
Stone
Ceiling lamp
Ceiling lamp
False ceiling
False ceiling

Related products

Zinc-plated shaft. Zinc-plated clip
Zinc-plated shaft. Zinc-plated clip
Eye bolt
Hook bolt
Eye bolt