Stone Cladding Fixing System Guides
Use this guide resource to review stone cladding fixing system terminology, bracket types, clips, clamps, rails, anchors, material and finish notes, and project RFQ preparation points before quotation.
Final specification should be confirmed before production, and material selection should be confirmed according to service environment and project documents.
Cladding Fixing Guides Overview
This page is the main WISINE resource guide for stone cladding fixing systems. It helps buyers, contractors, facade teams and procurement engineers prepare product questions, drawings and project information before requesting quotation.
Guide Scope
Use this page to understand product terminology and prepare discussions for brackets, anchors, clips, rails, matched fasteners, material grade, finish, packing notes and project documents.
- Product terminology for stone cladding fixing components
- Material and finish notes where specified by project documents
- RFQ checklist for drawings, dimensions, quantities and document scope
- Links to related Resources pages and business modules
Product Terminology Guide
Stone cladding fixing systems can include brackets, clips, clamps, support rails, anchors, bolts, nuts, washers and custom facade hardware. Exact product requirements should be confirmed before quotation.
Z Bracket
A formed bracket type used in stone panel support or positioning according to project drawings and installation conditions.
L Bracket
A right-angle bracket type used for support, connection or adjustment points where the project design specifies this geometry.
Omega Bracket
A shaped bracket type used in facade fixing assemblies where bracket geometry, holes and projection are defined by project documents.
Body Anchor Bracket
A bracket and anchor-related component used in stone fixing assemblies, often reviewed together with drawings and matched hardware.
Stone Clip / Stone Clamp
Clips and clamps can be used to hold, position or support stone panels according to facade system requirements.
Support Rail / U Channel
Rail and U channel components can support cladding assemblies or provide mounting lines where specified by the facade system.
Anchors / Bolts / Nuts / Washers
Matched hardware helps connect brackets, rails and substrate fixing points. Size, grade and finish should be confirmed before quotation.
Custom Facade Fixing Hardware
Drawing-based components can be discussed when standard bracket, clip, rail or fastener geometry does not match the project.
Brackets and Support Components
Bracket type selection can be discussed according to stone thickness, panel dimensions, substrate condition, projection distance, adjustment needs and project drawings.
Z Bracket and L Bracket
These bracket forms are often reviewed for panel support, connection and positioning requirements. Final bracket geometry should follow project drawings.
Omega and Body Anchor Brackets
These components may be used where the facade system specifies shaped support, anchor connection or adjustable fixing hardware.
Custom Support Components
Custom brackets, slotted plates and special support components can be discussed when drawings, samples or procurement specifications are provided.
Clips, Clamps, Rails and Channels
Stone clips, stone clamps, support rails and U channels should be reviewed together with panel arrangement, joint position, fixing method, material grade and project documents.
Stone Clip / Stone Clamp
Used as fixing or holding components for stone panel systems. Shape, hole pattern, material and finish should be confirmed before quotation.
Support Rail / U Channel
Used as rail or channel support components where specified by facade system drawings. Length, thickness and hole pattern should be confirmed.
Rail Accessories
Connectors, plates, washers, bolts and adjustment pieces can be discussed according to the installation drawing and project list.
Anchors, Bolts, Nuts and Washers
Matched hardware should be reviewed according to bracket type, substrate condition, thread, diameter, length, material grade, finish and project document requirements. Engineering calculations and site requirements remain project-specific.
Anchors
Anchor type, size and material should match the substrate and project specification. Site conditions should be reviewed by the project team.
Bolts
Bolts for cladding fixing assemblies should be confirmed by diameter, length, thread, material grade and finish.
Nuts
Nuts should be matched with thread type, bolt grade and assembly requirements where specified by project documents.
Washers
Flat washers, square washers, custom washers and matched washer sets can be discussed according to the fixing assembly.
Custom Facade Fixing Hardware
Custom facade fixing hardware can be discussed for non-standard brackets, clips, rails, anchors, washers, spacers and drawing-based metal parts. Final specification should be confirmed before production.
Useful Drawing Details
- Overall dimensions and hole pattern
- Material grade and surface finish
- Thickness, slot size, bend angle or machining notes
- Quantity and packing notes
- Certificate or inspection notes where specified by project documents
Material and Finish Notes
Material selection should be confirmed according to service environment, exterior exposure, project documents and procurement requirements. Finish and certificate availability should be confirmed before quotation.
| Topic | Guide Note | Related Resource |
|---|---|---|
| Stainless Steel | 304, 316 / 316L or project-specified stainless steel may be discussed according to application environment and drawings. | View Stainless Steel |
| Duplex / Special Alloys | Duplex or special alloy options can be discussed where specified by project documents or service environment. | View Materials & Alloys |
| Surface Finish | Plain, passivated, polished, coated or project-specified finish should be confirmed before quotation. | View Material Guides |
| Certificates | Material certificates and inspection documents can be discussed when required. Certificate availability should be confirmed before quotation. | View Standards & Certificates |
Drawing and Project Information Checklist
Clear project information helps WISINE review bracket type, material, finish, quantity and document scope. Product requirements should be confirmed before quotation.
| Information | Examples |
|---|---|
| Product type | Z bracket, L bracket, Omega bracket, body anchor bracket, stone clip, support rail, U channel, anchors, bolts, nuts, washers or custom facade fixing hardware. |
| Drawing or sample reference | PDF, DWG, DXF, sketch, sample photo, installation drawing or product list. |
| Stone and panel information | Stone thickness, panel size, approximate panel weight if available, joint layout or installation notes. |
| Fixing arrangement | Projection distance, cavity depth, slot or hole position, rail length, bracket spacing or assembly details. |
| Material and finish | Stainless steel grade, duplex or special alloy requirement, plain, passivated, polished or project-specified finish. |
| Quantity and packing | Pieces, sets, project schedule list, packing labels, part numbers or kit packing where specified by project documents. |
| Document requirement | Material certificate, inspection note or project documentation requirement that should be confirmed before quotation. |
| Destination country | Country or project location if relevant for material, packing or document review. |
Datasheets / Standards / Related Resources
Use related Resources pages for datasheet-style information, quote preparation, standards and certificate notes, fastener references and material guidance.
Resources Hub
Return to the main WISINE Resources module.
Product Datasheets
Review datasheet-style support for cladding fixing systems, fasteners, materials and custom parts.
Quote Preparation Guides
Prepare product type, material grade, drawing, dimensions, quantity and document requirements.
Standards & Certificates
Review standards and document notes where specified by project documents.
Fastener References
Review anchors, bolts, nuts, washers and matched fastener terminology.
Material Guides
Review material-family guidance for stainless steel, duplex and special metal discussions.
Related Business Modules
Stone Cladding Fixing
Review stone cladding fixing products and related categories.
Industrial Fasteners
Review fastener product families for matched hardware and project fasteners.
Custom Parts
Review custom metal parts and drawing-based production support.
Materials & Alloys
Review material families for cladding hardware and related custom components.
Cladding Fixing Guides FAQ
What is included in a stone cladding fixing system?
A system may include brackets, clips, clamps, support rails, anchors, bolts, nuts, washers, spacers and custom facade fixing hardware depending on project drawings.
How should bracket type be selected?
Bracket type should be reviewed according to stone thickness, panel dimensions, substrate, projection distance, adjustment needs and project documents.
Can WISINE discuss custom facade fixing hardware?
Yes. Custom facade fixing hardware can be discussed when drawings, samples, dimensions, materials and quantities are provided.
Can certificates be supplied with cladding fixing parts?
Material certificates and inspection documents can be discussed when required. Certificate availability should be confirmed before quotation.
Does this guide confirm installation suitability?
No. This guide supports product terminology and RFQ preparation. Final project use should follow project drawings, site conditions and professional project review.
What should I send before quotation?
Send product type, drawing, dimensions, stone thickness, material grade, finish, quantity, document requirement and destination country if relevant.
Need Stone Cladding Fixing Hardware for a Project?
Send the product type, drawing, material grade, surface finish, dimensions, quantity and document requirement. WISINE can discuss bracket, anchor, clip, rail, matched fastener and custom facade hardware requirements before quotation.