Shafts, Pins and Sleeves
Round components, spacers, bushings, sleeves, pins and shafts can be reviewed according to drawings and material requirements.
WISINE CUSTOM PARTS
Custom Metal Parts According to Drawing
Drawing-based custom metal parts, custom fasteners, custom alloy components and custom facade hardware for industrial and project-specific RFQs.
This hub introduces Custom Parts support for CNC / machining discussions, forging / forming discussions, OEM / ODM production discussions and project-specific hardware. Final specification should be confirmed before production, and availability is subject to material availability, quantity, processing requirements and document requirements.
CUSTOM PARTS OVERVIEW
Main Hub for Drawing-Based Custom Parts
The Custom Parts module supports RFQ preparation when standard product pages are not enough and a buyer needs review according to drawings, samples, sketches or project documents.
Manufacturing route, material grade, tolerance, finish, inspection scope and document requirements can be discussed, but product requirements should be confirmed before quotation and final specification should be confirmed before production.
Custom Parts Support Scope
- Drawing-based metal parts
- CNC machined components
- Forging, forming and fabrication discussions
- Custom fasteners and matched hardware
- Custom alloy components
- Custom facade fixing hardware
- OEM / ODM production discussions where specified by project documents
DRAWING-BASED METAL PARTS
Parts Reviewed According to Drawings
Drawing-based metal parts can be discussed when product type, drawing, material grade, dimensions, quantity, finish and document requirements are provided before quotation.
Plates, Blocks and Connectors
Custom plates, blocks, connectors, support parts and equipment components can be discussed according to drawings and quantities.
Project-Specific Hardware
Non-standard hardware for equipment, construction, facade, industrial and maintenance projects can be reviewed where specified by project documents.
CNC MACHINING
CNC Machining / Machined Component Discussions
CNC machining discussions may include turning, milling, drilling, threading and finishing steps. Exact production route should be confirmed before quotation based on drawings, tolerances, material grade, quantity and inspection requirements.
A 2D drawing and 3D model can help clarify critical dimensions, thread details, hole positions, surface finish and any inspection points where specified by project documents.
FORGING / FORMING / FABRICATION
Forging, Forming and Fabrication Discussion
Forged parts, formed components and fabricated hardware can be discussed according to drawings, material grade, forming requirements, machining allowance, finish and document scope.
Forged Parts
Forged rings, discs, blocks, shafts and near-net shapes can be reviewed when finished dimensions and material grade are clear.
Formed Parts
Bent, formed or pressed components can be discussed according to drawing, thickness, material, radius, hole pattern and surface requirement.
Fabricated Hardware
Welded or assembled hardware should include drawing, material, finish, inspection notes and application environment for quotation review.
CUSTOM FASTENERS
Custom Fasteners as a Hub Section
Custom fastener concepts are included here as Custom Parts hub sections only. No active standalone future child-page link is used until a dedicated page is confirmed.
Custom Bolts and Stud Bolts
Diameter, length, thread type, thread pitch, material grade, finish and document requirements should be confirmed before quotation.
Custom Nuts and Washers
Matching dimensions, material grade, thickness, thread details, coating and certificate availability should be confirmed before quotation.
Special Threaded Parts
Threaded rods, pins, spacers, anchors and non-standard parts can be discussed according to drawings and project requirements.
CUSTOM ALLOY COMPONENTS
Custom Alloy Components
Custom alloy components can be discussed in stainless steel, nickel alloy, duplex stainless steel, PH stainless steel, titanium and project-specified materials. Material selection should be confirmed according to service environment.
Stainless and Duplex Components
Custom components in stainless steel, duplex and super duplex materials can be reviewed according to project documents.
Nickel Alloy Components
Nickel alloy parts can be discussed for corrosive or high-temperature environments where specified by project documents.
Special Metal Components
Titanium, PH stainless steel and other project-specified metals should be confirmed before quotation with drawings and document requirements.
CUSTOM FACADE HARDWARE
Custom Facade Fixing Hardware
Custom facade hardware can be discussed for stone cladding fixing projects when drawings, material grade, finish, bracket type, dimensions, quantity and project document requirements are available.
Custom Brackets
Z brackets, L brackets, Omega brackets and body anchor brackets can be reviewed according to drawings and project requirements.
Clips, Clamps and Rails
Stone clips, stone clamps, support rails, U channels and matched components can be discussed where specified by project documents.
Matched Hardware Sets
Anchors, bolts, nuts, washers, plates and spacers can be reviewed together when the project requires matched hardware.
MATERIALS AND FINISH NOTES
Material, Finish and Document Requirements
Material selection should be confirmed according to service environment, corrosion conditions, temperature, process route, surface finish and document requirements.
Material Grade
Provide grade, standard, equivalent designation or project-specified material. Equivalent materials should be confirmed before quotation.
Surface Finish
Finish requirements such as passivation, polishing, coating, pickling or project-specified surface treatment should be confirmed before quotation.
Documents
Certificate availability should be confirmed before quotation. Document scope should be confirmed before production and shipment.
RFQ CHECKLIST
What to Provide for a Custom Parts RFQ
Providing clear RFQ information helps WISINE review the request and discuss suitable quotation details. Missing details should be confirmed before quotation.
| RFQ item | Details to prepare |
|---|---|
| Product type | Custom part, fastener, alloy component, bracket, clip, rail, machined part, forged part or project-specific hardware. |
| Drawing or sample | PDF, DWG, DXF, STEP, STP, sketch, photo or sample reference when available. |
| Material grade | Stainless steel, duplex, nickel alloy, titanium, PH stainless steel or project-specified material. |
| Dimensions | Diameter, length, thickness, hole pattern, thread details, critical dimensions and required tolerances. |
| Quantity | Sample quantity, project quantity, batch quantity or repeat production estimate. |
| Finish | Passivation, polishing, coating, heat treatment or finish where specified by project documents. |
| Documents | Material certificate, inspection note, packing note or other documents where specified by project documents. |
| Destination | Destination country, port or project location if relevant to quotation preparation. |
FAQ
Custom Parts FAQ
Can WISINE discuss custom parts according to drawings?
Yes. Custom parts can be discussed according to drawings, samples, sketches and project documents before quotation.
Are future custom fastener and alloy component pages active?
No. These topics are included on this hub as sections only until dedicated child pages are confirmed.
What information is needed for quotation?
Provide product type, drawing, material grade, dimensions, quantity, finish, document requirement and destination country if relevant.
Can material selection be discussed?
Material selection can be discussed, but it should be confirmed according to service environment and project documents.
Can certificates be supplied?
Certificate availability should be confirmed before quotation according to product type, material grade, quantity and document requirements.
Is production automatically confirmed after sending a drawing?
No. Product requirements should be confirmed before quotation and final specification should be confirmed before production.
CUSTOM PARTS INQUIRY
Prepare Drawings and RFQ Details for Review
Send drawings, material grade, dimensions, quantity, finish and document requirements through the main drawing-based conversion path. Custom part requirements can be discussed before quotation, and final specification should be confirmed before production.
Safe RFQ Preparation Path
Use drawings, material grade, dimensions, quantity, finish and document requirements to support quotation review.
Drawing files, material grade, quantity, finish and document requirements support engineering review before quotation discussion.