Custom Facade Fixing Hardware for Stone Cladding Projects
Drawing-based custom stainless steel facade fixing hardware for stone cladding brackets, anchors, support rails, clips, plates, washers, shims, spacers, special fasteners and complete fixing kits.
Product Overview
WISINE Custom Facade Fixing Hardware is prepared for stone cladding projects where bracket, anchor, plate, rail, clip, washer, shim, spacer or special fastener details need drawing-based production review.
Final specification should be confirmed according to project drawings, project-dependent fixing conditions, material requirements and responsible design review.
Custom facade fixing hardware refers to drawing-based components used to connect, adjust or complete stone cladding fixing systems when standard catalog parts do not fully match the project layout.
WISINE can discuss custom stainless steel brackets, custom stone anchors, facade fixing plates, support rail accessories, stone clip and clamp components, stone anchor and pin accessories, washers, shim plates, spacers, special fasteners and drawing-based fixing kits.
Before quotation, buyers should confirm drawings, material grade, thickness, geometry, hole pattern, slot size, bending, welding, machining, surface finish, quantity, packing and document requirements. These details help align the custom parts with brackets, anchors, support rails, clips, clamps and related stone cladding hardware.
PDF drawings, DWG, DXF, STEP files, marked photos, physical samples and project fastener schedules can be reviewed for quotation discussion. Final product suitability and fixing method should remain project-dependent and subject to responsible design review.
This page supports facade contractors, stone fabricators, distributors and engineering procurement teams that need OEM or custom fabrication for stone cladding fixing hardware according to project drawings.
Custom Manufacturing & Material Options
From drawing review to kit packaging discussion, WISINE supports custom facade fixing hardware for stone cladding systems and project-specific fixing assemblies.
Drawing-Based Fabrication
Custom parts can be reviewed according to PDF, DWG, DXF, STEP, marked photos, physical samples, sketches or project fastener schedules before quotation.
Stainless Steel & Alloy Options
SS304, SS316 and SS316L can be discussed for many stainless steel facade fixing parts. Duplex stainless steel, carbon steel or alloy steel should be reviewed only when project requirements and drawings support those options.
Cutting / Bending / Welding / Machining
Cutting, bending, punching, drilling, welding, threading and machining can be discussed according to part geometry, hole pattern, tolerance needs and sample review requirements.
Surface Finish & Kit Packaging
Plain, passivated, brushed, zinc plated, hot-dip galvanized and project-specified finishes can be reviewed together with labeled packing, kit packing and document requirements.
Custom Product Categories
WISINE can support multiple custom facade fixing hardware families as quotation discussion references according to stone cladding project drawings.
Technical Parameters
The parameters below are organized for custom production review. Final specification should be confirmed according to drawings, project-dependent fixing conditions and responsible design review.
Need custom hardware reference documents?
View product datasheet resources for drawing submission, parameter confirmation, and quotation discussion. Document availability should be confirmed before quotation.
| Inquiry Item | Options to Discuss | Information to Provide |
|---|---|---|
| Product Family | Custom brackets, anchor plates, rail accessories, clip components, anchor / pin accessories, washers, shims, spacers, special fasteners, fixing kits | Product name, application area, drawing, sample photo or project schedule |
| Drawing Format | PDF, DWG, DXF, STEP, marked photo, sample sketch, physical sample | Drawing file, revision, marked critical dimensions and tolerance requirement |
| Material Grade | SS304, SS316, SS316L, duplex stainless steel where supported by project drawings, carbon steel or alloy steel where specified | Required grade, project environment and material reference |
| Thickness / Diameter / Thread | Sheet thickness, plate thickness, rod diameter, thread size, special thread or drawing-based size | Thickness, diameter, thread, pitch and related drawing detail |
| Width / Length / Geometry | Flat plate, bent bracket, welded assembly, machined part, rail accessory or custom geometry | Overall dimensions, bend line, radius, projection, profile and key geometry notes |
| Hole / Slot Pattern | Round hole, slotted hole, countersunk hole, threaded hole, customized punching or drilling | Hole diameter, slot size, pitch, center distance, edge distance |
| Cutting / Bending / Welding / Machining | Cutting, bending, punching, drilling, welding, threading, machining and deburring | Process requirement, weld position, machined surface, edge requirement and sample need |
| Surface Finish | Plain, passivated, brushed, zinc plated, hot-dip galvanized or project-specified finish | Finish requirement, appearance requirement and environmental reference |
| Tolerance Requirement | General production tolerance, drawing tolerance, critical hole or slot position tolerance | Critical dimensions, inspection points and drawing notes |
| Matching Hardware | Brackets, anchors, rails, clips, clamps, bolts, nuts, washers, shims, spacers and complete fixing kits | Matching product list, thread size, hole size, bracket or rail profile |
| Application Area | Stone cladding, ventilated facade, support rail assembly, stone clip assembly, custom fixing kit | Project area, product location and related fixing detail |
| Sample / Prototype Requirement | Sample review, prototype review or production sample discussion when required by the project | Sample quantity, review target and schedule preference |
| Document Requirement | Material documents, inspection records, finish documents and packing documents can be discussed when required | Required document list before quotation or shipment |
| Packaging / Marking | Carton, pallet, labeled project packing, kit packing, item marking or export packing | Quantity, packing method, label format, kit grouping and destination country |
All dimensions, materials, fabrication methods, tolerances and fixing combinations are quotation discussion references only. Final product suitability, fixing method and project use should be confirmed according to project drawings and responsible design review.
Typical Applications
Suitable for stone cladding projects that require drawing-based custom components, coordinated accessories or complete fixing kit discussion.
Custom Bracket & Anchor Assemblies
Drawing-based brackets, anchor plates, fixture plates and matching fastener kits for stone cladding support and connection discussions.
Ventilated Cladding Substructure Parts
Custom rail accessories, channel connectors, slotted plates and bracket coordination parts for ventilated stone cladding systems.
Stone Clip / Anchor Accessories
Custom clip components, clamp components, anchor plates, pin accessories, washers and shims for drawing-based panel fixing details.
Special Fastener, Shim & Spacer Kits
Special fasteners, shim plates, spacers, serrated washers and small kit components organized according to project drawings.
Custom Production Workflow
A clear drawing-based workflow helps align material, geometry, process, finish, tolerance, packing and document requirements before quotation discussion.
Send Drawing / Sample / RFQ Details
Send PDF, DWG, DXF, STEP, marked photo, physical sample, project schedule or confirmed sketch with key dimensions.
Review Material, Geometry and Application
Review material grade, thickness, diameter, thread, overall geometry, hole or slot pattern and project application area.
Confirm Process, Finish and Tolerance
Confirm cutting, bending, welding, machining, surface finish, tolerance, sample review and document requirements before quotation.
Quotation Discussion
Quotation discussion can be prepared according to drawings, quantity, material, processing route, finish, packing and documentation requirements.
Sample / Prototype Review if Required
Samples or prototypes can be discussed when the project needs physical confirmation before larger production review.
Production, Packing and Documents
Production, inspection records, kit packing, project marking and requested documents can be coordinated according to confirmed order details.
Engineering Note
Custom facade fixing hardware should be reviewed with clear drawing control, material confirmation, tolerance notes, matching hardware coordination and responsible design review.
Control Drawing Revisions
Confirm the latest drawing revision, marked changes, critical dimensions and reference schedule before quotation discussion.
Confirm Material and Finish
Check material grade, thickness, finish, coating or passivation requirement and any document requirement before production review.
Confirm Tolerance and Hole Position
Review tolerance needs, hole position, slot size, bend line, weld position and sample or prototype review if required.
Coordinate Matching Hardware
Confirm whether brackets, clips, rails, anchors, bolts, nuts, washers, shim plates, spacers or complete kits should be packed together.
Project suitability, fixing method and final use should be confirmed by the responsible design party according to project drawings and project-dependent conditions.
Inquiry / RFQ Checklist
Send practical project information so WISINE can review the custom facade fixing hardware requirement and prepare a drawing-based quotation discussion.
A drawing is preferred, but a sketch, sample photo, or marked product image can support the first review.
| RFQ Item | Information to Send |
|---|---|
| Product Family | Custom bracket, anchor plate, rail accessory, clip component, stone anchor accessory, washer, shim, spacer, special fastener or fixing kit. |
| Drawing Format | PDF, DWG, DXF, STEP, marked photo, physical sample, marked sketch or project fastener schedule. |
| Material Grade | SS304, SS316, SS316L, duplex stainless steel where drawings support it, carbon steel or alloy steel where project specifications require it. |
| Thickness / Diameter / Thread | Plate thickness, sheet thickness, rod diameter, thread size, thread pitch or drawing-based dimensional details. |
| Overall Dimensions | Length, width, height, bend angle, projection, profile, part geometry and critical dimensions. |
| Hole / Slot Position | Hole diameter, slot size, countersink detail, thread hole, pitch, center distance and edge distance. |
| Bending / Welding / Machining Requirement | Process requirement, weld location, bend line, machined surface, deburring and sample review need. |
| Surface Finish | Plain, passivated, brushed, zinc plated, hot-dip galvanized or project-specified finish. |
| Tolerance Requirement | General tolerance, critical tolerance, hole position tolerance, inspection notes or drawing tolerance reference. |
| Matching Hardware | Brackets, anchors, rails, clips, clamps, bolts, nuts, washers, shims, spacers or complete fixing kit list. |
| Application Area | Stone cladding support, ventilated substructure, stone clip assembly, anchor assembly, rail connection or custom fixing kit. |
| Quantity | Estimated order quantity, project area grouping, kit quantity or phased shipment discussion if applicable. |
| Sample or Prototype Need | State whether sample, prototype or production sample review is required before regular production discussion. |
| Packaging / Marking | Carton, pallet, kit packing, item label, project area label, marking format and export packing requirement. |
| Document Requirement | Material document, inspection record, finish document, packing document or other project-required document list. |
| Project Environment | Indoor, exterior facade, coastal or industrial environment reference, substrate condition and related project notes. |
FAQ
Common questions from contractors, facade consultants, distributors, and purchasing teams.
Can WISINE manufacture according to drawings?
Yes. WISINE can discuss custom brackets, plates, anchors, clips, rail accessories, washers, shim plates, spacers, special fasteners and fixing kits according to drawings, samples, photos or project schedules.
What drawing formats are accepted?
PDF, DWG, DXF, STEP, marked photos, physical samples, sketches and project fastener schedules can be reviewed for quotation discussion.
What materials can be discussed?
SS304, SS316, SS316L and project-specified materials can be discussed. Duplex stainless steel, carbon steel or alloy steel should be reviewed only where project drawings or specifications support those choices.
Can bending, welding and machining be combined?
Yes. Cutting, bending, punching, drilling, welding, threading and machining can be discussed together when the drawing shows the required geometry, holes, slots, tolerances and finish.
Can small brackets, plates, shims and special fasteners be customized?
Yes. Small custom brackets, plates, washers, shim plates, spacers, pins, screws, bolts and other special fasteners can be reviewed according to drawing details and quantity.
What information is needed for quotation?
Please provide product family, drawing format, material grade, dimensions, hole or slot position, process requirement, finish, tolerance, matching hardware, quantity, packing and document requirements.
Can samples or prototypes be reviewed?
Sample or prototype review can be discussed when the project requires physical confirmation before regular production discussion.
How should project suitability be handled?
All custom hardware information is for quotation discussion reference only. Final product suitability, fixing method and project use should be confirmed according to project drawings and responsible design review.
Matching Hardware & Related Products
WISINE can discuss custom facade fixing hardware together with stone cladding matching products, industrial fasteners, custom parts resources and material references.
Primary Stone Cladding Matching Products
Related Custom Manufacturing & Fastener Resources
Send Your Custom Facade Hardware Drawing for a Quote
Share your drawing, sample photo, material grade, geometry, thickness, hole or slot details, process requirement, surface finish, quantity, packing and document requirements. WISINE can review custom fixing kit details and prepare a quotation discussion for your stone cladding fixing system.
