Send Drawing for Quote
Upload your drawing for engineering review and quotation.
WISINE can discuss requirements according to drawings, material grade, dimensions, quantity, finish and document scope. Final specification should be confirmed before production.
Main Drawing-Based Conversion Path
Upload your drawing or reference file for engineering review. Submission is for review only; manufacturability, production requirements and quotation details are confirmed during technical review.
- Custom parts according to drawings
- Custom fasteners and non-standard bolting parts
- Custom alloy components
- Custom facade fixing hardware
- Material, finish and document requirements
- Quantity, packing and destination details
Before Quotation
Product requirements should be confirmed before quotation. Availability is subject to material availability, quantity, processing requirements and document requirements.
What Products Can Be Quoted From Drawings
WISINE can discuss drawing-based RFQs for the following product groups when drawings, samples, material grades, dimensions and quantities are provided.
Custom Fasteners
Custom bolts, nuts, washers, threaded parts, anchors and non-standard fasteners according to drawings or samples.
Custom Alloy Components
Components in stainless steel, nickel alloys, duplex, PH stainless steel, titanium or project-specified alloys.
Drawing-Based Metal Parts
CNC machined parts, spacers, sleeves, shafts, pins, plates, forged parts, formed parts and fabricated parts.
Custom Facade Hardware
Custom brackets, anchors, clips, clamps, support rails, washers and stone cladding fixing hardware.
Drawing File Information
Clear drawings or reference materials help WISINE review the inquiry. Formal drawings are preferred for final quotation, while sketches or photos can support preliminary discussion.
2D Drawings
PDF, DWG or DXF drawings with dimensions, material grade, tolerances, finish and important notes.
3D Models
STEP, STP, IGS or IGES files can support geometry review for machined, forged or complex custom parts.
Samples, Photos or Sketches
Photos, sketches and sample references can be discussed, but final quotation may require confirmed drawings and specifications.
Material / Finish / Certificate Requirements
Material selection should be confirmed according to service environment. Finish, certificate and inspection document scope should be confirmed before quotation.
| Requirement | Information to Provide |
|---|---|
| Material grade | Stainless steel, nickel alloy, duplex, PH stainless steel, titanium, alloy steel or project-specified material. |
| Standard | ASTM, ASME, DIN, ISO, EN, JIS, GB, customer standard or drawing note where specified by project documents. |
| Surface finish | Machined, polished, passivated, brushed, coated, galvanized, anodized or project-specified finish. |
| Certificate notes | Material certificates and inspection documents can be discussed when required. Certificate availability should be confirmed before quotation. |
| Packing / marking notes | Part number marking, labels, carton, pallet or project packing requirements where specified by project documents. |
Custom Fasteners RFQ
Custom fasteners can be discussed according to drawings, thread requirements, material grade, finish, quantity and document requirements.
Products
Custom bolts, nuts, washers, threaded rods, stud bolts, anchors and special fasteners.
Information Needed
Thread, diameter, length, head type, tolerance, material grade, finish, quantity and drawing notes.
Related Module
Review standard and special fastener categories before preparing a drawing-based inquiry.
Custom Alloy Components RFQ
Custom alloy components can be discussed according to drawings, material grade, service environment, process route, dimensions, finish and document requirements.
Materials
Stainless steel, nickel alloys, duplex, super duplex, PH stainless steel, alloy steel, titanium and special metals.
Review Details
Material grade, standard, dimensions, tolerances, finish, application environment and certificate requirements.
Related Module
Use Materials & Alloys and Material Guides to prepare grade and document discussions.
Drawing-Based Metal Parts RFQ
Drawing-based metal parts may include machined, forged, formed or fabricated components. Production approach and final specification should be confirmed before production.
CNC / Machining Discussions
Spacers, shafts, sleeves, pins, threaded parts, plates and precision components according to drawings.
Forging / Forming Discussions
Forged parts, formed parts, stamped parts and fabricated project components where specified by drawings.
OEM / ODM Discussions
Repeat production or project-specific supply can be discussed when drawings, samples, specifications and quantity requirements are available.
Custom Facade Hardware RFQ
Custom facade fixing hardware can be discussed for non-standard brackets, anchors, clips, rails, spacers, washers and stone cladding fixing hardware according to drawings and project documents.
Products
Custom brackets, slotted plates, anchors, support rails, U channels, clips, clamps and matched hardware.
Project Details
Stone thickness, panel size, bracket drawing, material grade, finish, quantity and destination country if relevant.
Related Module
Review Stone Cladding Fixing and Cladding Fixing Guides before preparing a project-specific RFQ.
Drawing-Based RFQ Checklist
Complete RFQ information helps reduce repeated confirmation before quotation and production review.
| Information | Examples |
|---|---|
| Product type | Custom fastener, alloy component, machined part, forged part, facade hardware or project component. |
| Drawing / reference file | PDF, DWG, DXF, STEP, STP, IGS, IGES, sketch, photo or specification sheet. |
| Material grade | 304, 316 / 316L, 2205, 2507, C276, 625, 718, 17-4PH, titanium, alloy steel or project-specified material. |
| Dimensions and tolerance | Length, width, thickness, diameter, thread, hole pattern, bend angle, critical dimensions and tolerance notes. |
| Quantity | Sample quantity, trial order, batch quantity, project list or annual demand estimate. |
| Surface finish | Machined, polished, passivated, brushed, coated, galvanized, anodized or project-specified finish. |
| Document requirement | Material certificate, inspection note, packing note or project document requirement where specified. |
| Destination country | Country or project location if relevant for packing, document or material review. |
Send Drawing RFQ Form
Use the form below to send your drawing-based inquiry details for review. You can share product type, material grade, quantity, drawing files, application notes, certificate requirements and delivery destination.
After receiving your inquiry, WISINE will review the information and discuss quotation requirements according to drawings, material availability, processing requirements and document requirements.
Before You Submit
To help us review your RFQ more efficiently, please prepare the key information below.
Recommended details: product name, material grade, dimensions, quantity, surface finish, drawing or reference file, certificate requirement and destination country.
Accepted drawing/reference files may include PDF, DWG, DXF, STEP, STP, JPG, PNG, ZIP or RAR, depending on the upload limit of the form.
RFQ Review & Quotation Basis
After you submit your drawing-based RFQ, WISINE reviews the information according to drawings, material grade, dimensions, quantity, process requirements, certificate needs and destination details.
Information Used for Quotation Review
| RFQ Information | Why It Matters |
|---|---|
| Drawing / reference file | Helps review geometry, dimensions, tolerances, process route and production feasibility. |
| Material grade | Affects material sourcing, machining, corrosion resistance, heat treatment, certificates and cost review. |
| Quantity | Helps evaluate sample, trial order, batch production or project supply requirements. |
| Surface finish | Affects processing route, inspection, packing and quotation review. |
| Certificate requirement | EN10204 3.1 / 3.2, MTC, inspection or traceability requirements may affect sourcing and document review. |
| Destination country | Helps review packing, document, shipping and project communication requirements. |
Send Drawing for Quote FAQ
Can WISINE quote from drawings?
WISINE can discuss quotation requirements according to drawings, samples, sketches or specifications. Product requirements should be confirmed before quotation.
Can I send photos instead of formal drawings?
Photos can support preliminary discussion, but final quotation may require confirmed dimensions, material grade, quantity and technical requirements.
What information should I prepare before submitting the RFQ form?
Please prepare product type, drawing or reference file, material grade, dimensions, quantity, surface finish, certificate requirement and destination country. Complete information helps WISINE review your inquiry more efficiently before quotation.
Can custom fasteners be reviewed?
Yes. Custom fasteners can be discussed according to drawings, thread details, material grade, finish, quantity and document requirements.
Can custom alloy components be reviewed?
Yes. Custom alloy components can be discussed according to drawings, material grade, service environment and document requirements.
Can certificates or inspection documents be discussed?
Material certificates and inspection documents can be discussed when required. Certificate availability should be confirmed before quotation.
Prepare Your Drawing-Based RFQ
Share product type, drawing or reference file, material grade, dimensions, quantity, surface finish, certificate requirement and destination country if relevant. WISINE can discuss quotation requirements according to drawings and project documents.