General Information
Chemical Composition
Physical Properties
Mechanical Properties
General Information
Alloy 410 (UNS S41000) can be used in applications such as dental and surgical instruments, pipelines, valves and nozzles, automotive parts and more. 410 SS is generally used for applications which involve mild corrosion, high strength, and heat resistance. Depending on the application and performance requirements we also provide 410 stainless steel casting equivalent, CA15.
Alloy 410 (UNS S41000) is a basic martensitic grade which contains 11.5% chromium, offering both exceptional wear and corrosion resistance. SS 410 is corrosion resistant to some chemicals, food, mild acids, water, and air. It also proves adequate resistance to nitric acid, concentrated sulfuric acid, dilute acetic acid and naphtha. Elevated mechanical properties and corrosion resistance are achieved with stainless steel 410 when it’s hardened and tempered.
Standard Inventory Specifications
- UNS S41000
- AMS 5504
- AMS 5613 (Chemistry only)
- ASTM A 240
- ASTM A 276
- ASTM A 493
- ASTM F 899
- ASME SA 240
- B50991B
Common Trade Names
- ATI 410 (™ Allegheny Technologies)
- Alloy 410
- AISI Type 410
Common Applications of 410
- Aerospace structures
- Automotive exhausts, manifolds and high temperature engine components
- Medical instruments and devices
- Petro-chemical applications
- Cutlery, kitchen utensils
- Flat springs
- Hand tools
Chemical Composition
410 Chemical Composition
Element
Percent by Weight
C
Carbon
0.15 max
Mn
Manganese
1.00 max
Si
Silicon
1.00 max
Cr
Chromium
11.50 – 13.50
Ni
Nickel
0.75 max
S
Sulfur
0.03 max
P
Phosphorous
0.04 max
Physical Properties
410 Stainles Steel Physical Properties
| Physical property | Value |
| Density | 0.28 lb/in3 |
| Melting Range | 2700 – 2790 °F |
| Specific Heat Capacity at 70°F | 0.11 Btu/lb/°F |
| Thermal Conductivity at 212°F | 14.4 Btu/hr-ft-°F |
| Poisson’s Ratio | |
| Elastic Modulus at 72°F | 29.0 x 10６psi |
Mechanical Properties
Mechanical Properties and Yield Strength of 410
| Yield Strength 0.2% Offset |
Ultimate Tensile Strength |
Elongation in 2 in. |
Hardness | ||
| psi | (MPa) | psi | (MPa) | % | (max.) |
| 42,000 | 290 | 74,000 | 510 | 34 | 96 Rb |
410 Seamless Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: OD: Φ4-Φ1219mm; WT:…
Introduction: Wisine its production capacity of stainless steel seamless pipe, roughly 2100 tons per month. As per your requirement…
Get a quote
Learn More
410 Sanitary Tube
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: OD: Φ8-Φ850mm; WT:…
Introduction: Wisine produces sanitary tubes that are widely applicable to food & beverage industry, pharmaceutical industry…
Get a quote
Learn More
410 Thick-walled Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: OD: Φ10-Φ1219mm; WT:…
Introduction: Thick-walled stainless steel pipe, also named stainless steel hollow bar, are usually used for mechanical applications or…
Get a quote
Learn More
410 Welded Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: OD: Φ6-Φ2800mm; WT:…
Introduction: Wisine produces welded stainless steel pipe in different shapes: round, square and rectangle. In comparison with seamless pipe…
Get a quote
Learn More
410 Square Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: Side Length: 4×4-300×300mm…
Introduction: As per your requirement, stainless steel square pipe can be made into welded stainless steel square pipe or…
Get a quote
Learn More
410 Rectangle Pipe
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: Side Length: 4×6-200×400…
Introduction: Stainless steel rectangle pipe is hollow stainless steel long product and can be classified into seamless and welded…
Get a quote
Learn More
410 Capillary Tube
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: OD: Φ0.4-Φ16.0mm; WT:…
Introduction: Wisine produces stainless steel capillary with different finishes for your option. Quite common in our international markets…
Get a quote
Learn More
410 Coil Tube
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: OD: Φ0.4-Φ16mm; WT:…
Introduction: Stainless steel coil tubes refer to those tubes with diameter ranging from 0.5mm to 20mm and wall thickness from…
Get a quote
Learn More
410 Elbow
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Outer Diameter: DN15 – DN600…
Wall Thickness: Sch5S- Sch160…
Classification: 45° elbow, 90° elbow, 180° elbow, long radius elbow, short radius elbow…
Get a quote
Learn More
410 Flange
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Outer Diameter: DN6 – DN750…
Wall Thickness: Sch5S-Sch160S…
Classification: SW (Socket Welding) flange, WN (Welding Neck) flange, SO (Slip-On) flange…
Get a quote
Learn More
410 Tee
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Outer Diameter: DN15 – DN750…
Wall Thickness: Sch5S-Sch160…
Classification: Straight tee, reducing tee…
Get a quote
Learn More
410 Cross
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Outer Diameter: DN15 – DN1200…
Wall Thickness: Sch5S-Sch160…
Classification: Straight cross, reducing cross…
Get a quote
Learn More
410 Reducer
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Outer Diameter: DN15 – DN500…
Wall Thickness: Sch5S-Sch160…
Classification: Concentric reducer, eccentric reducer…
Get a quote
Learn More
410 Pipe Cap
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Outer Diameter: DN15 – DN1200…
Wall Thickness: Sch5S- Sch160…
Classification: Hemispherical cap, elliptical/oval cap, dish cap, spherical cap…
Get a quote
Learn More
410 Round Bar
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: Diameter: 2mm – 600mm…
Introduction: Stainless steel round bars are categorized as both long products and bar materials. SS round bar is long stainless steel product…
Get a quote
Learn More
410 Flat Bar
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: Thickness: 0.5mm – 200mm…
Introduction: Stainless steel flat bars are of rectangle shape with root face (or round edges) and they can be semi-finished or finished…
Get a quote
Learn More
410 Angle Bar
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: Equal Angle Bar Dimensions…
Introduction: Stainless steel angle bars are L-shape bars with two side widths perpendicular to each other. The two widths can be equal…
Get a quote
Learn More
410 Square Bar
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: Dimensions: 2mmx2mm – …
Introduction: Stainless steel square bars are long stainless steel products with its cross section as square. At Wisine, we produce SS square…
Get a quote
Learn More
410 Hexagon Bar
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: Dimension: 3mm – 180mm…
Introduction: Stainless steel hex bar is solid stainless steel long product with its cross section as hexagonal. Wisine produce stainless…
Get a quote
Learn More
410 Channel Bar
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: Hot Rolled: 40mmx80mmx…
Introduction: Stainless steel channel bar is stainless steel long product with its section as U shape. At Wisine, apart from stainless steel…
Get a quote
Learn More
410 Sheet
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: Thickness: ≤ 5mm…
Introduction: In Wisine, we refer to thickness below 5mm as stainless steel sheets and thickness above 5mm as SS plates…
Get a quote
Learn More
410 Plate
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: Thickness: ≥ 5mm…
Introduction: In Wisine, we regard thickness above (includes) 5mm as stainless steel plates. Our stainless steel plates are hot rolled…
Get a quote
Learn More
410 Coil
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: Width: ≥ 610mm…
Introduction: Our stainless steel coils are primary quality coils from the origin of Baosteel, ZPSS, TISCO, JISCO, ATI, SMC, HAYNES…
Get a quote
Learn More
410 Strip
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: Width: ≤ 610mm…
Introduction: Stainless steel strip has its width less than 610mm, with its thickness ranging from 0.02mm to 6mm. For width over 610mm…
Get a quote
Learn More
410 Wire
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: Diameter: 0.02mm-25mm…
Introduction: Wisine produces high quality wire and stainless steel wire rope. Our annual production capacity is roughly 8000 tons…
Get a quote
Learn More
410 Wire Rod
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Diameter: Hot rolled wire rod:…
Weight: ≤500Kg per roll
Tolerance: H9, H11
Get a quote
Learn More
410 Wire Rope
Standard: ASTM, JIS, DIN, EU…
Grade: 410…
Size: Φ0.15mm-Φ50mm…
Introduction: Wisine produces high quality wire and stainless steel wire rope. Our annual production capacity is roughly 8000 tons…
Get a quote
Learn More