Custom stainless steel stone clips and stone clamps for kerf-slot stone panel fixing, facade cladding, interior stone walls and drawing-based fixing hardware projects.
Stone clips and stone clamps are fixing accessories used to coordinate stone panel edges, kerf slots or grooves with brackets, rails, anchors and matching fasteners in stone cladding fixing systems.
Final dimensions, slot design, fixing method, spacing and project suitability should be confirmed according to project drawings and responsible design review.
Stone clips and stone clamps are used in stone cladding fixing systems where panel edges, kerf slots or grooves must coordinate with support brackets, rails, anchors, bolts, nuts and washers. They can support bottom clip, top clip, side retaining or auxiliary positioning logic according to project drawings.
For B2B quotation review, stone thickness, kerf slot size, groove position, clip geometry, hole or slot type, material grade, surface finish and matching hardware should be confirmed before quotation. WISINE can review fixed clips, adjustable clips, slotted-hole clamps and drawing-based custom stone clips according to project requirements.
The product can be reviewed in SS304, SS316, SS316L or duplex stainless steel where project requirements and drawings support it. Reference clip sizes such as 6 mm, 8 mm, 10 mm, 12 mm and 16 mm may be discussed according to stone thickness, kerf slot design, panel layout and project drawings.
Useful references: Stone Cladding Fixing System, Cladding Fixing Guides, and Product Datasheets.
For complete fixing systems, WISINE can also support matching brackets, anchors, bolts, nuts, washers, support rails, shims, spacers, and related stone cladding fixing hardware.
Built for stone cladding projects where kerf slot coordination, clip geometry, material grade, surface finish and drawing-based manufacturing must be reviewed before quotation.
SS304, SS316 and SS316L can be reviewed according to project environment, drawing requirements and document needs. Duplex stainless steel may be discussed only when project requirements support it.
Clip thickness, width, length, clamp geometry, kerf interface, hole position and slot detail can be reviewed according to drawings or samples.
Plain, passivated, brushed or project-specified finishes can be discussed according to indoor or exterior use, material grade and quotation requirements.
Fixed clips, adjustable clips, slotted clamps and custom stone clips can be reviewed with matching screws, anchors, bolts, nuts, washers and support rails.
The reference types below are for quotation discussion only. Final clip geometry, stone slot detail, fixing method and project suitability should be confirmed according to project drawings and responsible design review.
Typical use: Kerf-slot or groove-based panel positioning where a fixed clip geometry is defined by the drawing.
RFQ information: Stone thickness, kerf slot size, clip width, length, thickness, hole position and material grade.
Matching hardware: Screws, anchors, bolts, washers or rails should be confirmed according to the fixing layout.
Typical use: Projects requiring limited adjustment review for panel positioning, slot alignment or installation coordination.
RFQ information: Adjustment direction, slot detail, hole type, panel edge detail, material grade and drawing file.
Matching hardware: Matching anchors, washers, screws or support rails should be reviewed with the clip geometry.
Typical use: Projects where the head detail may need to coordinate with different kerf slot, groove or panel-edge requirements.
RFQ information: Head shape, clip body geometry, stone slot size, panel thickness and replacement head requirement.
Matching hardware: Confirm screws, nuts, washers and anchor details according to the final project drawing.
Typical use: Clamp-style fixing where slotted holes help coordinate position review during quotation discussion.
RFQ information: Slot length, slot width, hole position, clamp opening, material grade, finish and quantity.
Matching hardware: Bolt, nut, washer and anchor selection should be confirmed according to the fixing method.
Typical use: Panel edge positioning or auxiliary support in facade and interior stone wall applications where compact geometry is required.
RFQ information: Reference size, clip thickness, stone thickness, kerf slot detail, support position and drawing requirement.
Matching hardware: Matching screws, washers, anchors, brackets or rails can be discussed according to project needs.
Typical use: Non-standard stone clips, clamps or retaining details based on project drawings, samples or marked sketches.
RFQ information: PDF, DWG, DXF, sample photo, material grade, surface finish, quantity and document requirements.
Matching hardware: Full fixing packages can be reviewed with brackets, rails, anchors, bolts, nuts, washers and shims.
The parameters below are organized for B2B quotation review. All sizes, materials, reference sizes and configurations are quotation discussion references only.
Final dimensions, slot design, fixing method, spacing and project suitability should be confirmed according to project drawings and responsible design review.
Use the table below to prepare clip type, stone thickness, kerf slot detail, material grade, dimensions, matching hardware and document requirements. Certificate availability should be confirmed before quotation.
| Specification Item | Reference / Options to Discuss | Information to Provide |
|---|---|---|
| Product Type | Fixed stone clip, adjustable stone clip, slotted hole stone clamp, support clip, slimline support clip or custom stone clip | Product type, use position and drawing reference |
| Material Grade | SS304, SS316, SS316L; duplex stainless steel only when project requirements and drawings support it | Required grade, exposure condition and document requirement |
| Reference Size | 6 mm, 8 mm, 10 mm, 12 mm and 16 mm may be discussed according to stone thickness, kerf slot design, panel layout and drawings | Reference size, stone thickness and slot requirement |
| Thickness | Drawing-based thickness or project-specified thickness | Required thickness, tolerance and material grade |
| Width / Length | According to drawing, sample or quotation requirement | Overall width, length, bend detail and tolerance |
| Hole / Slot Type | Round hole, slotted hole, countersunk hole, project-specific punching or drilling | Hole diameter, slot length, slot width, position, pitch and edge distance |
| Kerf / Groove Compatibility | Kerf-slot or groove fixing detail according to project drawing | Stone thickness, kerf slot width, depth, edge distance and panel layout |
| Adjustment Requirement | Fixed, adjustable or interchangeable-head discussion according to drawing | Adjustment direction, slot requirement and clip/head geometry |
| Surface Finish | Plain, passivated, brushed or project-specified finish | Finish requirement and indoor or exterior application condition |
| Matching Hardware | Screws, anchors, bolts, nuts, washers, brackets, support rails and shims | Hardware list, thread size, washer requirement and complete kit request |
| Application Area | Exterior stone facade, ventilated cladding system, interior stone wall or decorative panel | Project environment, panel layout and substrate condition |
| Drawing Requirement | According to drawing, sketch, sample or confirmed project specification | PDF, DWG, DXF, STEP, marked photo, or approved shop drawing |
| Packaging / Marking | Carton, pallet, labeled project packing or export packing | Quantity, marking requirement, packing method and destination country |
All sizes, materials, reference sizes and configurations are quotation discussion references only. Final dimensions, slot design, fixing method, spacing and project suitability should be confirmed according to project drawings and responsible design review.
Suitable for stone cladding and facade projects where kerf-slot fixing, panel positioning, auxiliary restraint, edge coordination and concealed fixing details are required.
Used in exterior stone facade projects requiring kerf-slot stone panel fixing, concealed clip coordination and matching hardware review.
Suitable for rainscreen and back-ventilated facade assemblies where clips, clamps, brackets, anchors, washers and support rails are coordinated.
Used for interior stone walls and decorative panels where compact fixing geometry, edge coordination and finished appearance matter.
This information is for quotation and specification discussion only. Final fixing method, spacing and project suitability should be confirmed according to project drawings and responsible design review.
Use project drawings to confirm stone thickness, kerf slot or groove dimensions, clip geometry, matching hardware and final fixing method before quotation discussion.
Final installation must follow approved project drawings and responsible design review. This product page is for quotation and specification discussion only and does not replace responsible project review.
Confirm stone thickness, kerf slot or groove dimensions, panel edge detail and project drawing requirements before quotation review.
Select clip or clamp material, thickness, reference size and geometry according to the drawing, slot detail and project environment.
Coordinate brackets, rails, screws, anchors, nuts, washers and shims according to substrate condition and fixing layout.
Confirm final fixing method, spacing and project suitability according to project drawings and responsible design review.
Send the following details when requesting a quotation for stone clips or stone clamps. Complete RFQ information helps WISINE review the drawing, matching hardware, packing, and document requirements.
If drawings are not available, clear photos with key dimensions can be used for initial discussion.
| RFQ Item | Information to Send |
|---|---|
| Stone thickness | Stone panel thickness, edge condition and panel layout. |
| Kerf slot / groove size | Kerf slot width, depth, location, edge distance and groove detail. |
| Clip or clamp type | Fixed clip, adjustable clip, interchangeable-head detail, slotted clamp, support clip or custom drawing-based type. |
| Reference size | Reference size such as 6 mm, 8 mm, 10 mm, 12 mm or 16 mm if relevant to the drawing or stone slot detail. |
| Material grade | SS304, SS316, SS316L or project-specified material requirement. |
| Thickness / width / length | Clip thickness, width, length, bend detail, clamp opening and tolerances. |
| Hole or slot position | Hole diameter, slot length, slot width, center distance, edge distance and fastener size. |
| Adjustment requirement | Fixed or adjustable requirement, adjustment direction and interchangeable head discussion if needed. |
| Surface finish | Plain, passivated, brushed or project-specified finish. |
| Matching hardware | Screws, anchors, bolts, nuts, washers, brackets, support rails, shims or complete fixing kit requirement. |
| Drawing or sample availability | PDF, DWG, DXF, STEP, marked photo, sketch or physical sample reference. |
| Quantity and packaging requirement | Pieces, sets, batch quantity, label request, carton, pallet or export packing requirement. |
| Project environment | Exterior facade, ventilated cladding, interior wall, coastal area or other service condition. |
Common questions from contractors, facade consultants, distributors, and purchasing teams.
Yes. WISINE can review stone clips and stone clamps according to PDF, DWG, DXF, samples or confirmed sketches. Please include stone thickness, kerf slot detail, clip geometry, hole or slot details, material grade, surface finish and quantity.
A fixed clip is usually reviewed where the drawing defines the clip geometry and fixing position. An adjustable clip may be discussed where the project requires position review, slot coordination or installation adjustment according to drawings.
Yes. An interchangeable head detail can be discussed when project drawings require different head geometry for kerf slots, grooves or panel-edge coordination. Final suitability should be confirmed by the responsible design party.
Material selection should be reviewed according to project environment, drawings and document requirements. SS304, SS316 and SS316L can be discussed; duplex stainless steel should only be considered when project requirements and drawings support it.
Stone thickness, kerf slot width, slot depth, groove position and panel layout affect clip geometry and matching hardware review. These details should be confirmed before quotation discussion.
Yes. Stone clips and clamps can be discussed together with Z brackets, L brackets, Omega brackets, body anchors, support rails, anchors, bolts, nuts, washers and shims according to project documents.
Plain, passivated, brushed or project-specified finishes can be discussed according to material grade, indoor or exterior use and quotation requirements.
Please provide clip or clamp type, stone thickness, kerf slot or groove size, reference size, material grade, dimensions, hole or slot position, adjustment requirement, surface finish, matching hardware, drawings or samples, quantity and project environment.
WISINE can review Stone Clips and Stone Clamps together with primary matching hardware and related stone cladding components according to project drawings.
Share your stone clip or stone clamp drawing, stone thickness, kerf slot or groove details, material grade, dimensions, matching hardware needs, quantity and document requirements. WISINE can support quotation discussion according to your project drawings.
