Stone Anchors, Bolts, Pins, Nuts & Washers for Stone Cladding Fixing System
Stone anchors, rear undercut bolts, flanged pins, expansion anchors, threaded rods, screws, nuts, washers, shim plates and spacer accessories for drawing-based stone cladding fixing kits.
Product Overview
WISINE stone anchors, bolts, pins, nuts and washers cover stone panel fixing anchors and matching fastener accessories used in stone cladding fixing systems.
All anchor selection, embedment, spacing, fixing method and project suitability information is for quotation discussion reference only and should be confirmed according to project drawings and responsible design review.
This page covers stone anchor and fastener accessory families used in stone cladding fixing systems, including stone panel anchors, undercut bolts, pins, sleeves, substrate anchors, screws, bolts, nuts, washers, shim plates, spacers and complete fixing kits.
Rear undercut anchors and undercut bolts are used for stone panel back-surface fixing where project drawings require a concealed or rear fixing interface. Flanged pins, adjustable arms and plastic sleeves or tubes can be discussed for stone edge-hole or panel-edge fixing details.
Expansion anchors, wedge anchors, sleeve anchors, drop-in anchors and threaded rods are used for bracket-to-substrate or rail-to-substrate fixing discussions. Screws, bolts, nuts, washers, shims and spacers complete bracket, rail, clip, clamp and stone anchor assemblies.
Final selection is drawing-based and project-dependent. Stone thickness, back hole or edge hole detail, substrate condition, bracket hole size, rail profile, thread size, material grade, finish, packing method and document needs should be confirmed before quotation.
Stone anchor accessories, nuts, washers, shim plates and spacers can be discussed as part of complete fixing kits when required by stone drawings, bracket drawings, rail profiles, stone clip assemblies or project fastener schedules.
Useful references: Stone Cladding Fixing System, Industrial Fasteners, Fastener References, and Cladding Fixing Guides.
Material Options and Core Advantages
Built for stone cladding projects where stone anchor family, pin detail, sleeve dimension, thread size, material grade, finish, washer type, shim plate and complete kit matching should be reviewed before quotation.
Stainless Steel Grades
SS304, SS316 and SS316L can be discussed according to drawings, project environment and document requirements. Duplex stainless steel may be reviewed only when project requirements and drawings support it.
Anchor, Pin & Thread Size Review
Anchor family, undercut bolt detail, pin diameter, sleeve or tube size and metric thread sizes may be discussed according to stone drawings, bracket hole size, rail profile, substrate condition and project requirements.
Surface Finish Review
Plain, passivated, zinc plated, hot-dip galvanized and project-specified finishes can be reviewed according to material grade, project environment, matching hardware and quotation requirements.
Complete Stone Anchor Kit Matching
Rear anchors, flanged pins, sleeves, expansion anchors, threaded rods, screws, bolts, nuts, washers, shim plates and spacers can be discussed with brackets, rails, stone clips and custom fixing hardware.
Stone Anchor & Fastener Accessory Reference Types for Quotation Discussion
The categories below are reference types for quotation discussion only. Final anchor type, pin detail, sleeve dimension, thread size, embedment, spacing and fixing method should be confirmed according to project drawings and responsible design review.
Reference metric sizes such as M6, M8, M10, M12, M16, M20 and M24 may be discussed according to drawings, bracket hole size, rail profile, anchor type, substrate condition and project requirements.
Rear Undercut Stone Anchors / Undercut Bolts
Typical use: Stone panel back-surface fixing where a rear hole, undercut hole or slot-style fixing interface is required by project drawings.
Key RFQ information needed: Stone thickness, back hole detail, hole diameter, hole depth, fixture thickness, thread size, material grade, finish and drawing reference.
Matching hardware notes: Review with brackets, fixture plates, nuts, washers and responsible design review.
Flanged Pins / Adjustable Arms / Plastic Sleeves
Typical use: Stone edge-hole fixing, flanged pin positioning, adjustable arm connection or sleeve/tube-supported panel edge fixing.
Key RFQ information needed: Stone thickness, edge hole diameter, edge distance, pin diameter, arm length, sleeve/tube size, material grade and drawing.
Matching hardware notes: Review with plastic sleeves/tubes, washers, nuts, shims and panel edge details.
Expansion Anchors for Substrate Fixing
Typical use: Bracket-to-substrate or rail-to-substrate fixing into concrete, masonry or project-specified substrate.
Key RFQ information needed: Anchor type, substrate condition, hole size, diameter, length, embedment reference, bracket thickness and finish.
Matching hardware notes: Review with matching nuts, washers, shim plates, bracket holes and substrate condition.
Threaded Rods / Studs / Chemical Anchor Rod Assemblies
Typical use: Threaded connection, adjustable fixing, chemical anchor rod discussion or bracket / rail assembly according to drawings.
Key RFQ information needed: Thread size, pitch, length, material grade, finish, rod end detail, washer/nut requirement and drawing reference.
Matching hardware notes: Review with hex nuts, lock nuts, flat washers, plate washers, spacers and bracket or rail profiles.
Screws & Bolts for Brackets and Rails
Typical use: Bracket, rail, clip or clamp assembly where lag screws, carriage bolts, hex bolts, self-tapping screws or drawing-based special bolts are required.
Key RFQ information needed: Head type, diameter, length, thread length, thread type, material grade, finish and matching nut/washer need.
Matching hardware notes: Confirm washer diameter, nut style, bracket thickness, rail slot and hole compatibility.
Nuts, Washers, Shim Plates, Spacers & Complete Kits
Typical use: Complete fixing kit matching where nuts, lock nuts, washers, serrated washers, plate washers, shim plates and spacers complete the stone cladding hardware set.
Key RFQ information needed: Thread size, washer ID/OD/thickness, shim plate size, slot size, spacer thickness, quantity and packing requirement.
Matching hardware notes: Review by bracket drawing, rail profile, stone anchor type, substrate condition and project kit schedule.
Technical Parameters
The parameters below are organized for B2B quotation review across stone panel anchors, pin assemblies, substrate anchors, screws, bolts and complete fixing kit accessories.
Need product reference documents?
View stone anchor and fastener accessory resources for quotation discussion, parameter review and RFQ preparation. Required document scope should be confirmed before quotation.
| Inquiry Item | Options to Discuss | Information to Provide |
|---|---|---|
| Product Family | Rear undercut stone anchor, undercut bolt, flanged pin, sleeve, substrate anchor, threaded rod, screw, bolt, nut, washer, shim plate, spacer, complete kit | Stone anchor family, fastener list, drawing, application details or kit schedule |
| Stone-Fixing Anchor Type | Rear undercut anchor, undercut bolt, back-surface fixing anchor, drawing-based stone panel anchor | Stone thickness, back hole detail, hole diameter, hole depth, fixture thickness and drawing reference |
| Substrate Anchor Type | Expansion anchor, wedge anchor, sleeve anchor, strike anchor, drop-in anchor, chemical anchor rod assembly | Substrate condition, hole size, diameter, length, embedment reference, bracket thickness and finish |
| Pin / Sleeve / Adjustable Arm Type | Flanged pin, adjustable arm, plastic sleeve, plastic tube, edge-hole fixing accessory | Stone thickness, edge hole diameter, edge distance, pin diameter, arm length, sleeve/tube size and drawing |
| Bolt / Screw Type | Lag screw, carriage bolt, hex bolt, self-tapping screw, special bolt, threaded rod, stud | Head type, diameter, length, thread length, thread type, material grade, finish and matching nut/washer need |
| Nut / Washer / Shim Type | Hex nut, lock nut, channel nut, plain washer, serrated washer, plate washer, shim plate, spacer | Thread size, washer ID/OD/thickness, shim plate size, slot size, spacer thickness, quantity and packing requirement |
| Material Grade | SS304, SS316, SS316L, duplex stainless steel when supported by project drawings, carbon steel where specified | Required grade, project environment, drawing note and document requirement |
| Reference Thread / Diameter | Metric thread size, pin diameter, anchor diameter, sleeve diameter, screw diameter or drawing-based size | Thread size, pitch, diameter, rail profile, bracket hole, stone hole detail and drawing reference |
| Stone Thickness / Edge Hole / Back Hole Reference | Stone thickness, edge hole, back hole, undercut hole, hole depth, edge distance and fixture thickness | Stone drawing, panel thickness, hole detail, slot detail and fixture or bracket drawing |
| Hole / Slot / Sleeve Compatibility | Back holes, edge holes, bracket holes, rail slots, plastic sleeves, plastic tubes, oversized washer needs and shim arrangement | Hole size, slot size, sleeve/tube size, bracket drawing, rail profile and tolerance requirement if specified |
| Surface Finish | Plain, passivated, zinc plated, hot-dip galvanized, project-specified finish | Finish requirement, material grade, project environment and matching hardware finish |
| Matching Bracket / Rail / Clip | Z bracket, L bracket, Omega bracket, body anchor bracket, support rail, U channel, stone clip, stone clamp | Matching product drawing, hole detail, kit list and assembly sequence if available |
| Substrate / Stone Condition | Concrete, masonry, steel support member, natural stone panel or project-specified substrate / stone condition | Substrate information, stone information, drawing note, fixing method and project-dependent review requirement |
| Drawing / Standard Reference | Drawing-based supply, project-specified standard, sample-based review or confirmed fastener schedule | PDF, DWG, DXF, marked photo, standard reference or bill of materials |
| Packaging / Marking | Bag, carton, pallet, labeled kit packing, project area packing, export packing | Quantity, packing method, label content, destination country and document requirement |
All sizes, anchor types, pin details, sleeve dimensions, thread sizes, washers, shims, embedment references and fixing combinations are quotation discussion references only. Final selection, hole preparation, embedment, spacing, fixing method and project suitability should be confirmed according to project drawings and responsible design review.
Typical Applications
Suitable for stone cladding projects where rear stone anchors, pin accessories, substrate anchors and complete fastener kits must coordinate with stone panels, brackets, support rails and project drawings.
Rear Undercut Stone Panel Fixing
Used where stone panel drawings call for rear undercut anchors, undercut bolts, fixture plates, nuts and washers for concealed back-surface fixing discussions.
Bracket-to-Substrate Anchor Fixing
Suitable for bracket or support rail fixing into concrete, masonry or project-specified substrates using expansion anchors, threaded rods, nuts, washers, shim plates and spacers.
Flanged Pin / Edge Stone Panel Fixing
Used where flanged pins, adjustable arms, sleeves, tubes, washers, nuts, shims and edge-hole details are reviewed as part of a panel-edge fixing package.
Installation Reference
Stone anchor and fastener accessory selection should be reviewed according to stone panel details, substrate condition, bracket or rail layout, hole size, sleeve or tube detail, washer type, surface finish and project drawings.
Confirm Stone Panel and Substrate Conditions
Confirm stone thickness, back hole or edge hole requirement, substrate condition, bracket or rail layout and drawing details.
Select Anchor / Pin / Bolt Family
Select rear undercut anchor, flanged pin, expansion anchor, threaded rod, screw, bolt, nut, washer, shim or spacer family as quotation discussion reference.
Confirm Hole, Thread and Accessory Details
Confirm hole diameter, hole depth, slot detail, sleeve/tube size, thread size, washer type, nut type, shim requirement, surface finish and material grade.
Confirm Responsible Review
Confirm final fixing method, hole preparation, embedment, spacing and project suitability according to project drawings and responsible design review.
RFQ Checklist
Send the following details when requesting a quotation for stone anchors, undercut bolts, pins, substrate anchors, screws, nuts, washers, shim plates, spacers or complete fixing kits.
If a full fastener schedule is not ready, send the stone drawing, bracket drawing, rail profile, substrate condition and key dimensions for initial quotation discussion.
| RFQ Item | Information to Send |
|---|---|
| Product Family | Rear undercut stone anchor, flanged pin, adjustable arm, expansion anchor, threaded rod, screw, bolt, nut, washer, shim plate, spacer or complete kit. |
| Rear Undercut Anchor Requirement | Stone thickness, back hole detail, undercut hole detail, hole diameter, hole depth, fixture thickness, thread size, material grade and drawing. |
| Flanged Pin / Adjustable Arm / Sleeve Requirement | Pin diameter, arm length, sleeve or tube size, stone edge hole diameter, edge distance, material grade and drawing reference. |
| Substrate Anchor Type | Expansion anchor, wedge anchor, sleeve anchor, strike anchor, drop-in anchor, chemical anchor rod assembly or project-specified anchor type. |
| Bolt / Screw / Threaded Rod Requirement | Lag screw, carriage bolt, hex bolt, self-tapping screw, threaded rod, stud, head type, diameter, length, thread length and thread type. |
| Nut / Washer / Shim / Spacer Requirement | Nut type, washer ID/OD/thickness, serrated washer need, plate washer size, shim plate size, spacer thickness, quantity and packing requirement. |
| Stone Thickness | Stone panel thickness, stone type if relevant, edge condition and drawing reference. |
| Back Hole / Edge Hole / Slot Detail | Back hole diameter, back hole depth, undercut detail, edge hole diameter, edge distance, slot detail and sleeve/tube requirement. |
| Thread Size / Diameter / Length | Thread size, pitch, anchor diameter, pin diameter, sleeve diameter, rod length, screw length and bolt length according to drawings. |
| Material Grade | SS304, SS316, SS316L, duplex stainless steel where drawings support it, carbon steel where specified, or project-specified grade. |
| Surface Finish | Plain, passivated, zinc plated, hot-dip galvanized or project-specified finish. |
| Bracket / Rail / Clip Matching | Z bracket, L bracket, Omega bracket, body anchor bracket, support rail, U channel, stone clip, stone clamp or custom facade hardware. |
| Substrate Condition | Concrete, masonry, steel support member or project-specific substrate information for project-dependent review. |
| Drawing or Standard Reference | PDF, DWG, DXF, marked photo, standard reference, stone anchor drawing, fastener schedule or bracket assembly drawing. |
| Quantity and Packaging Requirement | Quantity by item, kit, bracket set or project area, plus bag, carton, pallet, label and marking requirements. |
| Project Environment | Indoor, exterior facade, ventilated cladding, coastal, industrial or project-specific environment where relevant to material and finish review. |
| Document Requirement | Material document, inspection document, coating document, packing list, project marking or other RFQ document requirement. |
FAQ
Common questions from contractors, facade consultants, distributors, and purchasing teams.
Can WISINE discuss rear undercut stone anchors?
Yes. Rear undercut stone anchors and undercut bolts can be discussed when stone panel drawings require back-surface fixing, undercut holes, fixture plates, nuts, washers and related accessories.
What information is needed for undercut bolt quotation?
Please provide stone thickness, back hole detail, hole diameter, hole depth, fixture thickness, thread size, material grade, finish, quantity and drawing reference.
Can flanged pins and plastic sleeves or tubes be discussed?
Yes. Flanged pins, adjustable arms, plastic sleeves and plastic tubes can be discussed for stone edge-hole or panel-edge fixing where drawings define stone thickness, edge distance, pin diameter and sleeve or tube size.
Can expansion anchors be matched with brackets and rails?
Yes. Expansion anchors, wedge anchors, sleeve anchors, drop-in anchors and threaded rod assemblies can be reviewed with Z brackets, L brackets, Omega brackets, support rails and body anchor brackets according to drawings and substrate condition.
How are threaded rods, nuts and washers matched?
Threaded rods, hex nuts, lock nuts, channel nuts, flat washers, serrated washers, plate washers and spacers should be reviewed according to thread size, rail profile, bracket hole size, assembly stack and drawing reference.
What stone thickness and hole information should be sent?
Send stone thickness, back hole detail, edge hole diameter, edge distance, hole depth, slot detail, sleeve or tube size and any fixture plate or bracket drawing that controls the fixing interface.
Can complete fixing kits be packed by project area?
Yes. Stone anchors, pins, substrate anchors, screws, bolts, nuts, washers, shim plates and spacers can be packed by item, bracket set, project area or kit schedule when quantity, marking, label content and packaging method are confirmed before production.
How should load-related information be handled during RFQ discussion?
Any load-related information should be treated as quotation discussion reference only. Final selection, hole preparation, embedment, spacing, fixing method and project suitability should be confirmed according to project drawings and responsible design review.
Matching Hardware & Related Products
WISINE can discuss stone anchors, undercut bolts, flanged pins, substrate anchors, threaded rods, screws, nuts, washers, shim plates and spacers together with matching brackets, stone clips, support rails and custom facade fixing hardware according to project drawings.
Send Your Stone Anchor Drawing or Fixing Kit List for a Quote
Share stone anchor drawings, undercut anchor or pin requirements, expansion anchor family, thread size, stone thickness, back hole or edge hole detail, material grade, quantity, packing needs and document requirements. WISINE can review complete fixing kit requirements for quotation discussion.
